Using Elastic Properties as a Predictive Tool to Identify Pore-Fluid Type in Carbonate Formations

Authors

  • Mahmoud Jasim Al-Khafaji Petroleum Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq
  • Wafaa’ Mustafa Al-Kattan Petroleum Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq

DOI:

https://doi.org/10.31699/IJCPE.2019.1.8

Keywords:

Elastic Properties, Mishrif Formation, sonic log.

Abstract

The aim of this study is for testing the applicability of Ramamoorthy and Murphy method for identification of predominant pore fluid type, in Middle Eastern carbonate reservoir, by analyzing the dynamic elastic properties derived from the sonic log. and involving the results of Souder, for testing the same method in chalk reservoir in the North Sea region. Mishrif formation in Garraf oilfield in southern Iraq was handled in this study, utilizing a slightly-deviated well data, these data include open-hole full-set logs, where, the sonic log composed of shear and compression modes, and geologic description to check the results. The Geolog software is used to make the conventional interpretation of porosity, lithology, and saturation. Also, include PVT and water analyses as inputs in Batzle and Wang correlations in order to calculate mechanical properties of oil and water at reservoir conditions. The shear velocity and density logs are used to calculate the shear modulus (G), for each (0.1254) meter.  The dry frame bulk modulus correlation of the original method was not followed, instead, a new dry frame bulk modulus correlation of Saxena is used to avoid the uncertainty in the porosity type exist in the formation which needs special core description. Then, Gassmann’s equations were used to determine the bulk moduli of the rock assuming two saturation conditions; the first is 100% water saturated, and the second is 100% oil saturated.  Using elastic properties equations of Love’s, and the resulted bulk moduli, two corresponding ∆t(s), (for oil and for water), were computed for each depth level. Then these ∆t(s) were plotted with sonic ∆t in the same track, and compiled with the conventional log interpretation, to compare the results. The method was a good indicator of the fluid type in the high porosity zones, unlike for the tight or clay-rich zones. The results are very conformable to the conventional interpretation, the OWC in both model and conventional interpretation are so close with error percentage of (0.03%).

References

R. Ramamoorthy and W. F. Murphy, “Fluid identification through dynamic modulus decomposition in carbonate reservoirs,” paper Q in 39th Annual Logging Symposium Transactions: Society of Professional Well Log Analysts, 1998.

W.W. Souder, “Using Sonic Logs to Predict Fluid Type,” Society of Petrophysicists and Well-Log Analysts, 1 Sep. 2002.

E. Fjær, R. M. Holt, A. M. Raaen, and R. Risnes, “Chapter 5 Elastic wave propagation in rocks,” in Petroleum Related Rock Mechanics, vol. 53, Elsevier, 2008, pp. 175–218.

J. W. Minear and C. R. Fletcher, “Full-Wave Acoustic Logging,” SPWLA 24th Annual Logging Symposium. Society of Petrophysicists and Well-Log Analysts, 1983.

M. R. Wyllie, A. R. Gregory, and L. W. Gardner, “Elastic Wave Velocities in Heterogeneous and Porous Media,” Geophysics, vol. 21, no. 1, Jan. 1956.

O. Serra, The acquisition of logging data, Elsevier, 1985.

A. M. Aqrawi, J. C. Guff, A. D. Horbury, and F. N. Sadooni, Petroleum Geology of Iraq, vol. 1, 1 vols. Aberystwyth, UK: Scientific Press Ltd., 2010.

S. Z. Jassim and T. Buday, “Units of Stable Shelf.,” in Geology of Iraq, 1st ed., Brno, Czech Republic: Dolin, 2006, pp. 57–70.

M. Embong, M. Higashi, H. H. Abu Bakar, K. A. Zamri, F. H. M Ali, S. Moriya, S. B. M Said, and A. T. Patrick Panting, “Petroleum Geoscience Conference & Exhibition2012,” in Reservoir Characterisatioin of Mishrif Formation of Garraf field, Iraq, using 3D seismic and AI Inversion, 2012.

Z. Wang, W.K. Hirsche, and G. Sedgwick, “Seismic velocities in carbonate rocks,” Journal of Canadian Petroleum Technology, pp. vol. 30, No.2, pp. 112 – 122, March-April, 1991.

J.H. Schön, Physical properties of rocks, 2nd ed., vol. 65. Amsterdam, Netherlands: Elsevier, 2015.

D. V. Ellis and J. M. Singer, Well logging for earth scientists, 2nd ed. Springer, 2007.

D. Han and M. Batzle, “Constrained and Simplified Gassmann’s Equations.,” Society of Exploration Geophysicists, pp. 1837–1841, 2002

G. Mavko, J. Dvorkin, and T. Mukerji, The rock physics handbook: Tools for Seismic Analysis of Porous Media. Cambridge, UK: Cambridge University Press, 2009.

J. E. White, Underground Sound: Application of Seismic Waves, 1st ed. Amsterdam: Elsevier, 1983.

N. Al-Khateb, “A look into Gassmann’s Equation,” in Geoconvention2013, Calgary, Canada, 2013.

A. E. H. LOVE, A Treatise on the Mathematical Theory of Elasticity, 4th ed. NY: Dover Publications, pp. 103–294, 1944.

M. Batzle and Z. Wang, “Seismic properties of pore fluids,” Geophysics vol. 57, pp. 1396–1408, 1992.

Z. Wang, M.L. Batzle, and A. Nur, 1990, “Effect of different pore fluids on seismic velocities in rocks,” Can. J. ExpI. Geophys., vol. 26, pp. 104-112. 1990.

V. Saxena, “Fresh Sonic Interpretation in Limestone Through Modulus Decomposition,” Society of Petroleum Engineers, New Delhi, India, 1998.

G.R. Pickett, “Acoustic Character Logs and Their Applications in Formation Evaluation,” Society of Petroleum Engineers, USA, 1 Jun. 1963.

Downloads

Published

2019-03-30

How to Cite

Jasim Al-Khafaji, M., & Mustafa Al-Kattan, W. (2019). Using Elastic Properties as a Predictive Tool to Identify Pore-Fluid Type in Carbonate Formations. Iraqi Journal of Chemical and Petroleum Engineering, 20(1), 53-64. https://doi.org/10.31699/IJCPE.2019.1.8

Publication Dates