Dates Pits Activated Carbon as Cheap Sorbent for the Decontamination of the Cadmium Ions in Battery Mills Wastewater

Authors

  • Haya Kahtan Khalaf Environmental Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq
  • Hayder M. Rashid Environmental Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq

DOI:

https://doi.org/10.31699/IJCPE.2024.2.11

Keywords:

Date pits; Heavy metals; wastewater; Cadmium; adsorption

Abstract

   In the current study, a novel date pit activated carbon, an environmentally friendly adsorbent, was, chemically activated by phosphoric acid, and employed as a bio-sorbent for Cd2+ adsorption from a simulated polluted solution. Utilizing a variety of characterization techniques, the surface morphology and functional groups of manufactured activated carbon and raw date pits are identified. The prepared activated carbon had an adsorption surface area and pore diameter values of 1700 m2/g and 3.78 nm, and this indicated the greatest increase in surface area. The effect of pH, initial Cd2+ concentration, contact time, and operating temperature on Cd2+ removal by date pit activated carbon was studied. A higher Cd2+ adsorption capacity of 48.34 mg/g was attained for a contact time of 240 min, initial concentration of 100 mg/L, and pH of 6 at 30 °C. The efficacy of Cd2+ adsorption on date pit activated carbon improved as the initial pH of the adsorbate increased to 6 and Cd2+ concentration decreased. At a given temperature of 30 °C, the Freundlich isotherm demonstrated to be the most adaptable one, indicating multilayer coverage with a 41.15 mg/g maximum adsorption capacity. For sorption favorability, the separation factor has been within the range of 0.001 to 0.003. Subsequently, the results demonstrated that the removal efficiency was adversely impacted by the rise in treatment temperature from 30 to 40 °C.

References

A. N. Ghanim, ‘Utilization of date pits derived bio-adsorbent for heavy metals in wastewater treatment: Review’, Al-Qadisiyah Journal for Engineering Sciences., vol. 16, pp. 58–69, 2023. https://doi.org/10.30772/qjes.v16i1.910

K. Al-Kaabi, A. Al-Khanbashi, and A. Hammami, ‘Date palm fibers as polymeric matrix reinforcement: DPF/polyester composite properties’, Polymer Composites., vol. 26, no. 5, pp. 604–613, 2005. https://doi.org/10.1002/pc.20130

V. C. Goyal, O. Singh, R. Singh, K. Chhoden, and S. K. Malyan, ‘Appraisal of heavy metal pollution in the water resources of Western Uttar Pradesh, India and associated risks’, Environ. Adv., vol. 8, no. April, p. 100230, 2022. https://doi.org/10.1016/j.envadv.2022.100230

J. Briffa, E. Sinagra, and R. Blundell, ‘Heavy metal pollution in the environment and their toxicological effects on humans’, Heliyon, vol. 6, no. 9, p. e04691, 2020. http://dx.doi.org/10.1016/j.heliyon.2020.e04691

Q. J. M. Slaiman, C. Kh. Haweel, and Y. R. Abdulmajeed, ‘Removal of Heavy Metals Ions from Aqueous Solutions Using Biosorption onto Bamboo’, Iraqi Journal of Chemical and Petroleum Engineering, vol. 11, no. 3, pp. 23–32, 2010. http://dx.doi.org/10.31699/ijcpe.2010.3.4

P. K. Rai, S. S. Lee, M. Zhang, Y. F. Tsang, and K. H. Kim, ‘Heavy metals in food crops: Health risks, fate, mechanisms, and management’, Environment International, vol. 125, no. November 2018, pp. 365–385, 2019. https://doi.org/10.1016/j.envint.2019.01.067

A. H. Sulaymon, S. E. Ebrahim, S. M. Abdullah, and T. J. Al-Musawi, ‘Removal of lead, cadmium, and mercury ions using biosorption’, Iraqi Journal of Chemical and Petroleum Engineering, vol. 11, no. 2, pp. 1–13, 2010. https://doi.org/10.31699/IJCPE.2010.2.1

P. B. Tchounwou, C. G. Yedjou, A. K. Patlolla, and D. J. Sutton, ‘Heavy Metal Toxicity and the Environment’, Molecular, Clinical and Environmental Toxicology, pp. 133–166, 2012. https://doi.org/10.1007/978-3-7643-8340-4

M. Vatandoost, D. Naghipour, S. Omidi, and S. D. Ashrafi, ‘Survey and mapping of heavy metals in groundwater resources around the region of the Anzali International Wetland; a dataset’, Data in Brief, vol. 18, pp. 463–469, 2018. https://doi.org/10.1016/j.dib.2018.03.058

G. K. Kinuthia, V. Ngure, D. Beti, R. Lugalia, and A. Wangila, ‘Open Levels of heavy metals in wastewater and soil samples from open drainage channels in nairobi, Kenya: community health implication’, Scientific Reports, pp. 1–13, 2020. https://doi.org/10.1038/s41598-020-68286-7

V. S. Cherednichenko, A. V. Cherednichenko, A. V. Cherednichenko, A. K. Zheksenbaeva, and A. S. Madibekov, ‘Heavy metal deposition through precipitation in Kazakhstan’, Heliyon, vol. 7, no. 1, p. e05844, 2021. https://doi.org/10.1016/j.heliyon.2020.e05844

T. K. Tran, N. Kim, Q. C. Le, M. T. Nguyen, H. J. Leu, and K. N. Vo Thi, ‘Electrochemical preparation and characterization of polyaniline enhanced electrodes: An application for the removal of cadmium metals in industrial wastewater’, Materials Chemistry and Physics, vol. 261, no. January, p. 124221, 2021. https://doi.org/10.1016/j.matchemphys.2021.124221

N. Mohammad and Y. Atassi, ‘Enhancement of removal efficiency of heavy metal ions by polyaniline deposition on electrospun polyacrylonitrile membranes’, Water Science and Engineerin., vol. 14, no. 2, pp. 129–138, 2021. https://doi.org/10.1016/j.wse.2021.06.004

J. Kończyk, ‘Selective solvent extraction of some heavy metal ions from aqueous solutions by octafunctionalized resorcin[4]arenes’, Physicochemical Problems of Mineral Processing, vol. 56, no. 2, pp. 271–285, 2020. https://doi.org/10.37190/ppmp20001

H. A. Qdais and H. Moussa, ‘Removal of heavy metals from wastewater by membrane processes: A comparative study’, Desalination, vol. 164, no. 2, pp. 105–110, 2004. https://doi.org/10.1016/S0011-9164(04)00169-9

T. M. Zewail and N. S. Yousef, ‘Kinetic study of heavy metal ions removal by ion exchange in batch conical air spouted bed’, Alexandria Engineering Journal, vol. 54, no. 1, pp. 83–90, 2015. http://dx.doi.org/10.1016/j.aej.2014.11.008

M. Medfu Tarekegn, F. Zewdu Salilih, and A. I. Ishetu, ‘Microbes used as a tool for bioremediation of heavy metal from the environment’, Cogent Food and Agriculture, vol. 6, no. 1, 2020. https://doi.org/10.1080/23311932.2020.1783174

N. S. Al-Kadhi et al., ‘Preparation of NiO/MWCNTs nanocomposite and its application for cadmium ion removal from aqueous solutions’, Journal of Materials Research and Technology, 2022. https://doi.org/10.1016/j.jmrt.2022.05.149

M. Nageeb, ‘Adsorption Technique for the Removal of Organic Pollutants from Water and Wastewater’, in Organic Pollutants - Monitoring, Risk and Treatment Efficient, M. N. Rashed, Ed. Intech open science| open mind, 2013. https://doi.org/10.5772/54048

M. S. Ismail, M. D. Yahya, M. Auta, and K. S. Obayomi, ‘Facile preparation of amine -functionalized corn husk derived activated carbon for effective removal of selected heavy metals from battery recycling wastewater’, Heliyon, vol. 8, no. 5, p. e09516, 2022. https://doi.org/10.1016/j.heliyon.2022.e09516

N. C. Joshi and P. Gururani, ‘Advances of graphene oxide based nanocomposite materials in the treatment of wastewater containing heavy metal ions and dyes’, Current Research in Green and Sustainable Chemistry, vol. 5, no. December 2021, p. 100306, 2022. https://doi.org/10.1016/j.crgsc.2022.100306

G. Li et al., ‘Hydrothermal synthesis of zeolites-calcium silicate hydrate composite from coal fly ash with co-activation of Ca(OH)2-NaOH for aqueous heavy metals removal’, International Journal of Mining Science and Technology, vol. 32, no. 3, pp. 563–573, 2022. https://doi.org/10.1016/j.ijmst.2022.03.001

B. G. Fouda-Mbanga, E. Prabakaran, and K. Pillay, ‘Carbohydrate biopolymers, lignin based adsorbents for removal of heavy metals (Cd2+, Pb2+, Zn2+) from wastewater, regeneration and reuse for spent adsorbents including latent fingerprint detection: A review’, Biotechnology Reports, vol. 30, p. e00609, 2021. https://doi.org/10.1016/j.btre.2021.e00609

M. Ibrahim, A. A. AbdulRazak, and A. Dari Jaafar, ‘Removal of Copper (II) from Wastewater Using Modified Carbon Nanotubes’, Engineering and Technology Journal, vol. 31, no. 12, pp. 2228–2241, 2013. https://doi.org/10.30684/etj.31.12a.2

K. Hummadi, ‘Optimal Operating Conditions for Adsorption of Heavy Metals from an Aqueous Solution by an Agriculture Waste’, Iraqi Journal of Chemical and Petroleum Engineering, vol. 22, no. 2, pp. 27–35, 2021. https://doi.org/10.31699/IJCPE.2021.2.4

A. Gil et al., ‘A review of organic-inorganic hybrid clay based adsorbents for contaminants removal: Synthesis, perspectives and applications’, Journal of Environmental Chemical Engineering, vol. 9, no. 5, p. 105808, 2021. https://doi.org/10.1016/j.jece.2021.105808

N. M. Hilal, I. A. Ahmed, and R. E. El-Sayed, ‘Activated and Nonactivated Date Pits Adsorbents for the Removal of Copper(II) and Cadmium(II) from Aqueous Solutions’, ISRN Physical Chemistry, vol. 2012, pp. 1–11, 2012. https://doi.org/10.5402/2012/985853

R. Krishnamoorthy, B. Govindan, F. Banat, V. Sagadevan, M. Purushothaman, and P. L. Show, ‘Date pits activated carbon for divalent lead ions removal’, Journal of Bioscience and Bioengineering, vol. 128, no. 1, pp. 88–97, 2019. https://doi.org/10.1016/j.jbiosc.2018.12.011

C. J. Geankoplis, ‘Liquid-Liquid and Fluid-Solid Separation Processes’, in Transport processes and unit operations, Third., vol. 20, no. 1, C. J. Geankoplis, Ed. UK: Prentice-Hall Internatioal, Inc., 1980, pp. 697–743. https://doi.org/10.1016/0300-9467(80)85013-1

M. Hamid Khashan and A. K. Mohammad, ‘Comparative study for Pb2+ adsorption from simulated wastewater of battery manufacture on activated carbon prepared from rice husk with different activation agents’, Al-Qadisiyah Journal for Engineering Sciences, vol. 15, no. 3, pp. 147–155, 2022. https://doi.org/10.30772/qjes.v15i3.827

S. A. Yousif and S. Al-Mosawi, ‘Adsorptive separation of dissolved cadmium from aqueous solution using (Ziziphus Spina-Christi) leaves as an adsorbent’, South African J. Chem. Eng., vol. 42, no. April, pp. 12–22, 2022. https://doi.org/10.1016/j.sajce.2022.07.002

I. Langmuir, ‘The Constitution and fundamental properties of solids and liquids. Part I. Solids’, Journal of the American Chemical Society, vol. 38, no. 11, pp. 2221–2295, 1916. https://doi.org/10.1021/ja02268a002

A. Islam, M. R. Khan, and S. I. Mozumder, ‘Adsorption Equilibrium and Adsorption Kinetics: A Unified Approach’, Chemical Engineering & Technology, vol. 27, no. 10, pp. 1095–1098, 2004. https://doi.org/10.1002/ceat.200402084

A. P. Meneghel, A. C. Gonçalves, L. Strey, F. Rubio, D. Schwantes, and J. Casarin, ‘Biosorption and removal of chromium from water by using moringa seed cake (Moringa oleifera Lam.)’, Quimica Nova, vol. 36, no. 8, pp. 1104–1110, 2013. https://doi.org/10.1590/S0100-40422013000800005

W. J. Thomas and B. Crittenden, Adsorption Technology and Design, no. April. Elsevier Science & Technology Books, 1998.

C. S. T. Araújo, I. L. S. Almeida, H. C. Rezende, S. M. L. O. Marcionilio, J. J. L. Léon, and T. N. de Matos, ‘Elucidation of mechanism involved in adsorption of Pb(II) onto lobeira fruit (Solanum lycocarpum) using Langmuir, Freundlich and Temkin isotherms’, Microchemical Journal, vol. 137, no. Ii, pp. 348–354, 2018. http://dx.doi.org/10.1016/j.microc.2017.11.009

C. T. Chiou, ‘Fundamentals of the Adsorption Theory’, in Partition and Adsorption of Organic Contaminants in Environmental Systems, John Wiley & Sons, Inc., 2003, pp. 39–52. http://dx.doi.org/10.1002/0471264326.ch4

H. Freundlich, ‘Über die Adsorption in Lösungen’, Zeitschrift für Physikalische Chemie, vol. 57U, no. 1, pp. 385–470, 1906. https://doi.org/10.1515/zpch-1907-5723

M. Azam, M. R. Khan, S. M. Wabaidur, S. I. Al-Resayes, and M. S. Islam, ‘Date pits waste as a solid phase extraction sorbent for the analysis of lead in wastewater and use in manufacturing brick: An eco-friendly waste management approach’, Saudi Chemical Society, vol. 26, no. 5, p. 101519, 2022. https://doi.org/10.1016/j.jscs.2022.101519

M. Azam, S. M. Wabaidur, M. R. Khan, S. I. Al-Resayes, and M. S. Islam, ‘Heavy Metal Ions Removal from Aqueous Solutions by Treated Ajwa Date Pits: Kinetic, Isotherm, and Thermodynamic Approach’, Polymers (Basel)., vol. 14, no. 5, 2022. https://doi.org/10.3390/polym14050914

M. A. Khan et al., ‘Unary and binary adsorption studies of lead and malachite green onto a nanomagnetic copper ferrite/drumstick pod biomass composite’, Hazardous Materials., vol. 365, pp. 759–770, 2019. https://doi.org/10.1016/j.jhazmat.2018.11.072

M. Azam, S. M. Wabaidur, M. R. Khan, M. S. Islam, and S. I. Al-Resayes, ‘Removal of chromium(III) and cadmium(II) heavy metal ions from aqueous solutions using treated date seeds: An eco-friendly method’, Molecules, vol. 26, no. 12, 2021. https://doi.org/10.3390/molecules26123718

B. Kayranli, ‘Cadmium removal mechanisms from aqueous solution by using recycled lignocelluloses’, Alexandria Engineering Journal, vol. 61, no. 1, pp. 443–457, 2022. https://doi.org/10.1016/j.aej.2021.06.036

M. F. F. Sze and G. McKay, ‘An adsorption diffusion model for removal of para-chlorophenol by activated carbon derived from bituminous coal’, Environmental Pollution, vol. 158, no. 5. Elsevier Ltd., Hong Kong, pp. 1669–1674, 2010. https://doi.org/10.1016/j.envpol.2009.12.003

K. Nabil, N. Abdelmonem, M. Nogami, and I. Ismail, ‘Preparation of composite monolith supercapacitor electrode made from textile-grade polyacrylonitrile fibers and phenolic resin’, Materials (Basel)., vol. 13, no. 3, 2020. https://doi.org/10.3390/ma13030655

M. I. Kandah et al., ‘Adsorption of cadmium onto activated and non-activated date pits’, World Academy of Science, Engineering and Technology, vol. 62, no. February 2010, pp. 204–208, 2010. https://doi.org/10.5281/zenodo.1082736

B. Abbar et al., ‘Experimental investigation on removal of heavy metals (Cu2+, Pb2+, and Zn2+) from aqueous solution by flax fibres’, Process Safety and Environmental Protection, vol. 109, no. June, pp. 639–647, 2017. http://dx.doi.org/10.1016/j.psep.2017.05.012

F. Banat, S. Al-Asheh, and L. Al-Makhadmeh, ‘Kinetics and equilibrium study of cadmium ion sorption onto date pits - An agricultural waste’, Adsorption Science & Technology, vol. 21, no. 3, pp. 245–260, 2003. http://dx.doi.org/10.1260/026361703322404395

[49] A. Bumajdad and P. Hasila, ‘Surface modification of date palm activated carbonaceous materials for heavy metal removal and CO2 adsorption’, Arabian Journal of Chemistry, vol. 16, no. 1, p. 104403, 2023. https://doi.org/10.1016/j.arabjc.2022.104403

W. A. Al-Onazi, M. H. H. Ali, and T. Al-Garni, ‘Using Pomegranate Peel and Date Pit Activated Carbon for the Removal of Cadmium and Lead Ions from Aqueous Solution’, Journal of Chemistry, vol. 2021, 2021. https://doi.org/10.1155/2021/5514118

F. Bouhamed, Z. Elouear, and J. Bouzid, ‘Adsorptive removal of copper(II) from aqueous solutions on activated carbon prepared from Tunisian date stones: Equilibrium, kinetics and thermodynamics’, Journal of the Taiwan Institute of Chemical Engineers, vol. 43, no. 5, pp. 741–749, 2012. http://dx.doi.org/10.1016/j.jtice.2012.02.011

Downloads

Published

2024-06-30

How to Cite

Khalaf, H. K., & Rashid, H. M. (2024). Dates Pits Activated Carbon as Cheap Sorbent for the Decontamination of the Cadmium Ions in Battery Mills Wastewater. Iraqi Journal of Chemical and Petroleum Engineering, 25(2), 119-129. https://doi.org/10.31699/IJCPE.2024.2.11

Publication Dates

Received

2023-04-26

Revised

2023-10-20

Accepted

2023-10-20

Published Online First

2024-06-30