Carbon dioxide capture using functionalized multi-wall carbon nanotubes by EDA

Authors

DOI:

https://doi.org/10.31699/IJCPE.2024.4.8

Keywords:

MWCNTs; Amine Functionalization; ethylenediamine; CO2 adsorption; Functional groups.

Abstract

   Carbon dioxide (CO2) is the primary factor considered to be responsible for global warming. CO2 capture technology has been considered an important issue to decrease greenhouse gas emissions. The current research investigates the functionalization of Multi-Wall Carbon nanotubes (MWCNTs) by Ethylenediamine (EDA) solution which is used for CO2 capture at various operating conditions. Surface functionality groups and morphology of MWCNTs and physical properties were analyzed by X-ray diffraction (XRD), Fourier Transforms Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), surface area Brunauer Emmett and Teller (BET). The physical and chemical properties of CNTs have changed after the functionalization process, which enhances MWCNTs adsorption for CO2 gas. According to the study's results, during the functionalization process, amine groups bound to carbonaceous surfaces created CO2 adsorption sites on multi-walled CNTs, increasing the adsorption capacity of MWCNTs. The CO2 adsorption capacity was determined by volumetric technique at temperatures from 309 to 333 °K and a pressure of 1 to 7 bar. The exothermic nature of the adsorption process was indicated by the decreasing of CO2 adsorption capabilities via MWCNTs and MWCNTs-EDA with temperature rising. The results showed that the MWCNTs-EDA are a potential low-temperature adsorbent for CO2 capture. In addition, 0.6968 mmol g−1 of CO2 was adsorbed by MWCNT-EDA at 309 °K, while raw MWCNT adsorbed only 0.3428 mmol g−1 at the same condition.  Both the Freundlich and Langmuir adsorption isotherms were used to model the experimental data, with the conclusion being that the Freundlich model fits the data well.

References

J. Gutsche, Ł. Muślewski, A. Dzioba, and S. Matyukh, “Identification and analysis of factors influencing climate change in terms of CO2 emissions,” MATEC Web of Conferences, 2021, vol. 332, p. 01002, http://dx.doi.org/10.1051/matecconf/202133201002

M. S. Khasanova and M. A. Saidulgerieva, “Alternative methods of production and consumption as tools for solving global problems of modern society and implementing the principles of sustainable development,” BIO Web of Conferences, 2024, vol. 82, p. 05034, http://dx.doi.org/10.1051/bioconf/20248205034

K. Saidi and A. Omri, “Reducing CO2 emissions in OECD countries: Do renewable and nuclear energy matter?,” Progress in Nuclear Energy, vol. 126, p. 103425, Aug. 2020, http://dx.doi.org/10.1016/j.pnucene.2020.103425

K. O. Yoro and M. O. Daramola, “CO2 emission sources, greenhouse gases, and the global warming effect,” Advances in Carbon Capture, 2020, pp. 3–28, http://dx.doi.org/10.1016/b978-0-12-819657-1.00001-3

S. f. Jaber, Y. M. Abdul wahab, and S. M. Zboon, “Investigation of Factors Affecting the Efficiency of Carbon Dioxide Removal in a Single Perforated Sieve Tray Column,” Journal of Petroleum Research and Studies, vol. 2, no. 2, pp. 35–43, May 2011, http://dx.doi.org/10.52716/jprs.v2i2.36

A. W. Dhuyool and I. K. Shakir, “Carbon Dioxide Capturing via a Randomly Packed Bed Scrubber Using Primary and Poly Amine Absorbents,” Journal of Ecological Engineering, vol. 24, no. 11, pp. 14–29, Nov. 2023, https://doi.org/10.12911/22998993/170205

L. Liu and S. K. Bhatia, “Molecular Simulation of CO2 Adsorption in the Presence of Water in Single-Walled Carbon Nanotubes,” The Journal of Physical Chemistry C, vol. 117, no. 26, pp. 13479–13491, Jun. 2013, http://dx.doi.org/10.1021/jp403477y

B. I. Waisi, J. T. Majeed, and N. S. Majeed, “Carbon dioxide capture using nonwoven activated carbon nanofiber,” IOP Conference Series: Earth and Environmental Science, Jun. 2021, vol. 779, no. 1, p. 012056, http://dx.doi.org/10.1088/1755-1315/779/1/012056

Y. Su, S. Liu, and X. Gao, “Impact of Impure Gas on CO2 Capture from Flue Gas Using Carbon Nanotubes: A Molecular Simulation Study,” Molecules, vol. 27, no. 5, p. 1627, Mar. 2022, https://doi.org/10.3390/molecules27051627

A. Hirsch and O. Vostrowsky, “Functionalization of Carbon Nanotubes,” Topics in Current Chemistry, Jan. 2005, pp. 193–237, http://dx.doi.org/10.1007/b98169

L. Liu, D. Nicholson, and S. K. Bhatia, “Exceptionally high performance of charged carbon nanotube arrays for CO2 separation from flue gas,” Carbon, vol. 125, pp. 245–257, Dec. 2017, https://doi.org/10.1016/j.carbon.2017.09.050

D. J. Babu, M. Lange, G. Cherkashinin, A. Issanin, R. Staudt, and J. J. Schneider, “Gas adsorption studies of CO2 and N2 in spatially aligned double-walled carbon nanotube arrays,” Carbon, vol. 61, pp. 616–623, Sep. 2013, https://doi.org/10.1016/j.carbon.2013.05.045

M. I. Romero-Hermida, J. M. Romero-Enrique, V. Morales-Flórez, and L. Esquivias, “Flue gas adsorption by single-wall carbon nanotubes: A Monte Carlo study,” The Journal of Chemical Physics, vol. 145, no. 7, Aug. 2016, https://doi.org/10.1063/1.4961023

F. Su, C. Lu, W. Cnen, H. Bai, and J. F. Hwang, “Capture of CO2 from flue gas via multiwalled carbon nanotubes,” Science of The Total Environment, vol. 407, no. 8, pp. 3017–3023, Apr. 2009, https://doi.org/10.1016/j.scitotenv.2009.01.007

N. S. Majeed and J. T. Majeed, “Study the Performance of Nanozeolite NaA on CO2 Gas Uptake,” Iraqi Journal of Chemical and Petroleum Engineering, vol. 18, no. 2, pp. 57–67, Jun. 2017, https://doi.org/10.31699/IJCPE.2017.2.5

K. Rahimi, S. Riahi, M. Abbasi, and Z. Fakhroueian, “Modification of multi-walled carbon nanotubes by 1,3-diaminopropane to increase CO2 adsorption capacity,” Journal of Environmental Management, vol. 242, pp. 81–89, Jul. 2019, https://doi.org/10.1016/j.jenvman.2019.04.036

H. Hu, T. Zhang, S. Yuan, and S. Tang, “Functionalization of multi-walled carbon nanotubes with phenylenediamine for enhanced CO2 adsorption,” Adsorption, vol. 23, no. 1, pp. 73–85, Nov. 2016, https://doi.org/10.1007/s10450-016-9820-y

Q. Liu, Y. Shi, S. Zheng, L. Ning, Q. Ye, M. Tao, & Y. He, “Amine-functionalized low-cost industrial grade multi-walled carbon nanotubes for the capture of carbon dioxide,” Journal of Energy Chemistry, vol. 23, no. 1, pp. 111–118, Jan. 2014, https://doi.org/10.1016/S2095-4956(14)60124-8

F. V. Ferreira, W. Franceschi, B. R. C. Menezes, F. S. Brito, K. Lozano, A. R. Coutinho and G. P. Thim, “Dodecylamine functionalization of carbon nanotubes to improve dispersion, thermal and mechanical properties of polyethylene based nanocomposites,” Applied Surface Science, vol. 410, pp. 267–277, Jul. 2017, https://doi.org/10.1016/j.apsusc.2017.03.098

S. Gómez, N. M. Rendtorff, E. F. Aglietti, Y. Sakka, and G. Suárez, “Surface modification of multiwall carbon nanotubes by sulfonitric treatment,” Applied Surface Science, vol. 379, pp. 264–269, Aug. 2016, https://doi.org/10.1016/j.apsusc.2016.04.065

L. S. Salah, N. Ouslimani, D. Bousba, I. Huynen, Y. Danlée, and H. Aksas, “Carbon Nanotubes (CNTs) from Synthesis to Functionalized (CNTs) Using Conventional and New Chemical Approaches,” Journal of Nanomaterials, vol. 2021, pp. 1–31, Sep. 2021, https://doi.org/10.1155/2021/4972770

E. Molyanyan, S. Aghamiri, M. R. Talaie, and N. Iraji, “Experimental study of pure and mixtures of CO2 and CH4 adsorption on modified carbon nanotubes,” International Journal of Environmental Science and Technology, vol. 13, no. 8, pp. 2001–2010, Apr. 2016, http://dx.doi.org/10.1007/s13762-016-0989-0

J. M. Ngoy, N. Wagner, L. Riboldi, and O. Bolland, “A CO2 Capture Technology Using Multi-walled Carbon Nanotubes with Polyaspartamide Surfactant,” Energy Procedia, vol. 63, pp. 2230–2248, 2014, https://doi.org/10.1016/j.egypro.2014.11.242

M.-S. Lee, S.-Y. Lee, and S.-J. Park, “Preparation and characterization of multi-walled carbon nanotubes impregnated with polyethyleneimine for carbon dioxide capture,” International Journal of Hydrogen Energy, vol. 40, no. 8, pp. 3415–3421, Mar. 2015, https://doi.org/10.1016/j.ijhydene.2014.12.104

S. Khalili, A. A. Ghoreyshi, M. Jahanshahi, and K. Pirzadeh, “Enhancement of Carbon Dioxide Capture by Amine‐Functionalized Multi‐Walled Carbon Nanotube,” CLEAN – Soil, Air, Water, vol. 41, no. 10, pp. 939–948, May 2013, https://doi.org/10.1002/clen.201200339

M. Irani, A. T. Jacobson, K. A. M. Gasem, and M. Fan, “Modified carbon nanotubes/tetraethylenepentamine for CO2 capture,” Fuel, vol. 206, pp. 10–18, Oct. 2017, https://doi.org/10.1016/j.fuel.2017.05.087

A. Maleki, U. Hamesadeghi, H. Daraei, B. Hayati, F. Najafi, G. McKay, & R. Rezaee, “Amine functionalized multi-walled carbon nanotubes: Single and binary systems for high capacity dye removal,” Chemical Engineering Journal, vol. 313, pp. 826–835, Apr. 2017, https://doi.org/10.1016/j.cej.2016.10.058

S. S. Narwade, S. M. Mali, and B. R. Sathe, “Amine-functionalized multi-walled carbon nanotubes (EDA-MWCNTs) for electrochemical water splitting reactions,” New Journal of Chemistry, vol. 45, no. 8, pp. 3932–3939, 2021, https://doi.org/10.1039/D0NJ05479H

X. Zhong, X. Zhang, X. Sun, B. Liu, Y. Kuang, And J. Chen, “Pt and Pt‐Ru Nanoparticles Dispersed on Ethylenediamine Grafted Carbon Nanotubes as New Electrocatalysts: Preparation and Electrocatalytic Properties for Ethanol Electrooxidation,” Chinese Journal of Chemistry, vol. 27, no. 1, pp. 56–62, Jan. 2009, https://doi.org/10.1002/cjoc.200990026

Z. Zhao, Z. Yang, Y. Hu, J. Li, and X. Fan, “Multiple functionalization of multi-walled carbon nanotubes with carboxyl and amino groups,” Applied Surface Science, vol. 276, pp. 476–481, Jul. 2013, https://doi.org/10.1016/j.apsusc.2013.03.119

S. Shukrullah, M. Y. Naz, N. M. Mohamed, K. A. Ibrahim, N. M. AbdEl-Salam, and A. Ghaffar, “CVD Synthesis, Functionalization and CO2 Adsorption Attributes of Multiwalled Carbon Nanotubes,” Processes, vol. 7, no. 9, p. 634, Sep. 2019, https://doi.org/10.3390/pr7090634

M. M. Gui, Y. X. Yap, S.-P. Chai, and A. R. Mohamed, “Multi-walled carbon nanotubes modified with (3-aminopropyl triethoxysilane) for effective carbon dioxide adsorption,” International Journal of Greenhouse Gas Control, vol. 14, pp. 65–73, May 2013, https://doi.org/10.1016/j.ijggc.2013.01.004

L. Thi Mai Hoa, “Characterization of multi-walled carbon nanotubes functionalized by a mixture of HNO3/H2SO4,” Diamond and Related Materials, vol. 89, pp. 43–51, Oct. 2018, https://doi.org/10.1016/j.diamond.2018.08.008

N. Janudin, L. C. Abdullah, N. Abdullah, F. Md Yasin, N. M. Saidi, and N. A. Mohd Kasim, “Comparison and Characterization of Acid Functionalization of Multi Walled Carbon Nanotubes Using Various Methods,” Solid State Phenomena, vol. 264, pp. 83–86, Sep. 2017, https://doi.org/10.4028/www.scientific.net/SSP.264.83

Z. Zhou, “The Investigation of Functionalized Carbon Nanotubes for the Carbon Dioxide Capture and Ethane Oxidative Dehyrogenation Catalysts,” 2020. Theses and Dissertations. 8417, BYU ScholarsArchive.

C. Lu, H. Bai, B. Wu, F. Su, and J. F. Hwang, “Comparative Study of CO2 Capture by Carbon Nanotubes, Activated Carbons, and Zeolites,” Energy & Fuels, vol. 22, no. 5, pp. 3050–3056, Jul. 2008, https://doi.org/10.1021/ef8000086

G. D. Vuković, Marinković, A. D., Čolić, M., Ristić, M. Đ., Aleksić, R., Perić-Grujić, A. A., & Uskoković, P. S, “Removal of cadmium from aqueous solutions by oxidized and ethylenediamine-functionalized multi-walled carbon nanotubes,” Chemical Engineering Journal, vol. 157, no. 1, pp. 238–248, Feb. 2010, https://doi.org/10.1016/j.cej.2009.11.026

M. R. Mello, D. Phanon, G. Q. Silveira, P. L. Llewellyn, and C. M. Ronconi, “Amine-modified MCM-41 mesoporous silica for carbon dioxide capture,” Microporous and Mesoporous Materials, vol. 143, no. 1, pp. 174–179, Aug. 2011, https://doi.org/10.1016/j.micromeso.2011.02.022

D. J. N. Subagyono, Z. Liang, G. P. Knowles, and A. L. Chaffee, “Amine modified mesocellular siliceous foam (MCF) as a sorbent for CO2,” Chemical Engineering Research and Design, vol. 89, no. 9, pp. 1647–1657, Sep. 2011, https://doi.org/10.1016/j.cherd.2011.02.019

J. Wei, L. Liao, Y. Xiao, P. Zhang, and Y. Shi, “Capture of carbon dioxide by amine-impregnated as-synthesized MCM-41,” Journal of Environmental Sciences, vol. 22, no. 10, pp. 1558–1563, Oct. 2010, https://doi.org/10.1016/S1001-0742(09)60289-8

S. Hong, C. Wen, J. He, F. Gan, and Y. S. Ho, “Adsorption thermodynamics of Methylene Blue onto bentonite,” Journal of Hazardous Materials, vol. 167, no. 1–3, pp. 630–633, Aug. 2009, https://doi.org/10.1016/j.jhazmat.2009.01.014

S. Khalili, A. A. Ghoreyshi, M. Jahanshahi, and K. Pirzadeh, “Enhancement of Carbon Dioxide Capture by Amine‐Functionalized Multi‐Walled Carbon Nanotube,” CLEAN – Soil, Air, Water, vol. 41, no. 10, pp. 939–948, May 2013, https://doi.org/10.1002/clen.201200339

S. J. Allen, G. Mckay, and J. F. Porter, “Adsorption isotherm models for basic dye adsorption by peat in single and binary component systems,” Journal of Colloid and Interface Science, vol. 280, no. 2, pp. 322–333, Dec. 2004, https://doi.org/10.1016/j.jcis.2004.08.078

C. L. Hsueh, Y.-W. Lu, C.-C. Hung, Y.-H. Huang, and C.-Y. Chen, “Adsorption kinetic, thermodynamic and desorption studies of C.I. Reactive Black 5 on a novel photoassisted Fenton catalyst,” Dyes and Pigments, vol. 75, no. 1, pp. 130–135, Jan. 2007, https://doi.org/10.1016/j.dyepig.2006.05.020

Q. Fu et al., “Equilibrium, kinetic and thermodynamic studies on the adsorption of the toxins of Bacillus thuringiensis subsp. kurstaki by clay minerals,” Applied Surface Science, vol. 255, no. 8, pp. 4551–4557, Feb. 2009, https://doi.org/10.1016/j.apsusc.2008.11.075

Q. Ye, J. Jiang, C. Wang, Y. Liu, H. Pan, and Y. Shi, “Adsorption of Low-Concentration Carbon Dioxide on Amine-Modified Carbon Nanotubes at Ambient Temperature,” Energy & Fuels, vol. 26, no. 4, pp. 2497–2504, Mar. 2012, https://doi.org/10.1021/ef201699w

S. Yasyerli, G. Dogu, I. Ar, and T. Dogu, “Activities of Copper Oxide and Cu−V and Cu−Mo Mixed Oxides for H2S Removal in the Presence and Absence of Hydrogen and Predictions of a Deactivation Model,” Industrial & Engineering Chemistry Research, vol. 40, no. 23, pp. 5206–5214, Aug. 2001, https://doi.org/10.1021/ie0010621

A. Naghizadeh, S. Nasseri, A. H. Mahvi, R. Nabizadeh, R. R. Kalantary, and A. Rashidi, “Continuous adsorption of natural organic matters in a column packed with carbon nanotubes,” Journal of Environmental Health Science and Engineering, vol. 11, no. 1, Jul. 2013, https://doi.org/10.1186/2052-336X-11-14

Downloads

Published

2024-12-30

How to Cite

Hassan, I. F., Majeed, N. S., & Al-salman, A. A. (2024). Carbon dioxide capture using functionalized multi-wall carbon nanotubes by EDA. Iraqi Journal of Chemical and Petroleum Engineering, 25(4), 81-92. https://doi.org/10.31699/IJCPE.2024.4.8