Superior properties of drilling mud via sustainable nanoparticle priming
DOI:
https://doi.org/10.31699/IJCPE.2026.2.3Keywords:
Sustainable synthesis; silica; alumina; nanoparticles; drilling mudAbstract
This study demonstrates a sustainable, "trash-to-treasure" approach by synthesizing silica (SiO2) and alumina (Al2O3) nanoparticles (30–80 nm) from local waste materials—specifically bentonite clay and aluminum wire waste—and evaluating their performance as eco-friendly additives in 350 mL water-based drilling fluids at concentrations ranging from 0 to 1 g. Tested under harsh subsurface conditions, the incorporated nanoparticles significantly enhanced the fluids' rheological properties, lubricity, filtration control, and swelling inhibition, with performance scaling alongside nanoparticle concentration. Notably, at a 1 g dosage, the fluid's yield point spiked from a baseline of 9 to 42 for SiO2 and 32 for (Al2O3), while high-pressure high-temperature (HPHT) fluid loss was reduced from 21 mL to 14.6 mL (SiO2) and 16.4 mL (Al2O3) due to the formation of a low-permeability filter cake. Furthermore, a 0.75 g dosage lowered the coefficient of friction from 0.45 to 0.35 (SiO2) and 0.37 (Al2O3), while effectively mitigating clay swelling (SiO2) showing superior inhibition at lower concentrations), ultimately proving that these waste-derived nanoparticles offer a highly effective, cost-efficient, and environmentally friendly alternative to commercial drilling mud additives.
Received on 17/03/2026
Received in Revised Form on 01/06/2026
Accepted on 01/06/2026
Published on 30/06/2026
References
[1] J. Aramendiz and A. Imqam, "Water-based drilling fluid formulation using silica and graphene nanoparticles for unconventional shale applications," Journal of Petroleum Science and Engineering, vol. 179, pp. 742–749, 2019.
https://doi.org/10.1016/j.petrol.2019.04.085
[2] H. M. Ahmad, T. Iqbal, M. A. Al Harthi, and M. S. Kamal, "Synergistic effect of polymer and nanoparticles on shale hydration and swelling performance of drilling fluids," Journal of Petroleum Science and Engineering, vol. 205, Oct. 2021.
https://doi.org/10.1016/j.petrol.2021.108763
[3] J. A. Ali et al., "Evaluation the effect of wheat nano-biopolymers on the rheological and filtration properties of the drilling fluid: Towards sustainable drilling process," Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 683, Feb. 2024.
https://doi.org/10.1016/j.colsurfa.2023.133001
[4] H. A. Abbood and I. K. Shakir, "Using nano-additives to improve drilling fluid properties," AIP Conference Proceedings, vol. 2779, 2023.
https://doi.org/10.1063/5.0142334
[5] S. Perween, M. Beg, R. Shankar, S. Sharma, and A. Ranjan, "Effect of zinc titanate nanoparticles on rheological and filtration properties of water based drilling fluids," Journal of Petroleum Science and Engineering, vol. 170, pp. 844–857, 2018.
https://doi.org/10.1016/j.petrol.2018.07.006
[6] V. A. Zhigarev, M. I. Pryazhnikov, A. V. Matveev, E. I. Mikhienkova, and D. V. Guzei, "Computational study of cutting transport by drilling fluids in directional wells," Journal of Physics: Conference Series, IOP Publishing Ltd, Dec. 2020.
https://doi.org/10.1088/1742-6596/1677/1/012079
[7] G. N. Abang, Y. S. Pin, and N. Ridzuan, "Application of silica (SiO₂) nanofluid and Gemini surfactants to improve the viscous behavior and surface tension of water-based drilling fluids," Egyptian Journal of Petroleum, vol. 30, no. 4, pp. 37–42, Dec. 2021.
https://doi.org/10.1016/j.ejpe.2021.10.002
[8] A. Retnanto et al., "Evaluation of the viability of nanoparticles in drilling fluids as additive for fluid loss and wellbore stability," Petroleum, vol. 9, no. 3, pp. 342–351, Sep. 2023.
https://doi.org/10.1016/j.petlm.2023.02.005
[9] Y. Villada et al., "Synergistic effect of nanoparticles and viscoelastic surfactants to improve properties of drilling fluids," Petroleum Science, vol. 21, no. 6, pp. 4391–4404, Dec. 2024.
https://doi.org/10.1016/j.petsci.2024.11.014
[10] A. K. Alkalbani, G. T. Chala, and A. M. Alkalbani, "Experimental investigation of the rheological properties of water base mud with silica nanoparticles for deep well application," Ain Shams Engineering Journal, vol. 14, no. 10, p. 102147, 2023.
https://doi.org/10.1016/j.asej.2023.102147
[11] K. Al Attabi et al., "Enhanced Rheological and Filtration Performance of Drilling Fluids Using Fe₃O₄/Saponin/Cu(II) Nanocomposites: Synthesis, Characterization, and Application," Asia-Pacific Journal of Chemical Engineering, 2026.
https://doi.org/10.1002/apj.70234
[12] M. S. Hameed, N. S. Al-Zubaidi, and A. A. Alwasiti, "Multi-Functional Enhancement of Water-Based Drilling Fluid Using Copper Nanoparticles: A Study on Lubricity, Rheology, and Filtration Properties," Emerging Trends in Engineering and Sustainability, vol. 2, no. 1, pp. 13–20, Mar. 2026.
https://doi.org/10.65505/ETES-25-0013
[13] U. Zulfiqar, T. Subhani, and S. W. Husain, "Synthesis and characterization of silica nanoparticles from clay," Journal of Asian Ceramic Societies, vol. 4, no. 1, pp. 91–96, 2016.
https://doi.org/10.1016/j.jascer.2015.12.001
[14] M. Esaifan et al., "Synthesis of Nanostructured Alumina from Byproduct Aluminum Filings: Production and Characterization," Inorganics, vol. 11, no. 9, 2023.
https://doi.org/10.3390/inorganics11090355
[15] A. R. Albajalan and H. K. Haias, "Evaluation of the Performance of Conventional Water-Based Mud Characteristics by Applying Zinc Oxide and Silica Dioxide Nanoparticle Materials for a Selected Well in the Kurdistan/Iraq Oil Field," Advances in Materials Science and Engineering, vol. 2021, 2021.
https://doi.org/10.1155/2021/4376366
[16] B. M. Kurji, I. M. Mujtaba, and A. S. Abbas, "Synthesis, Characterizations, and Recent Applications of the Silica-based Mobil Composition of Mesoporous Material: A Review," Iraqi Journal of Chemical and Petroleum Engineering, vol. 24, no. 3, pp. 1–12, 2023.
https://doi.org/10.31699/ijcpe.2023.3.1
[17] N. A. Al-Rubaiey, F. S. K. Kadhim, and M. G. A. Albrazanjy, "The Effect of Adding Carboxymethyl Cellulose and Zinc Sulfate on the Corrosion Characteristics of the Drilling Fluid," Al-Khwarizmi Engineering Journal, vol. 15, no. 1, pp. 125–133, Mar. 2019.
https://doi.org/10.22153/kej.2019.08.003
[18] X. Wang et al., "Research on Nanoparticle-Enhanced Cooling Technology for Oil-Based Drilling Fluids," Applied Sciences, vol. 14, no. 23, pp. 1–12, 2024.
https://doi.org/10.3390/app142310969
[19] A. I. El-Diasty and A. M. Salem Ragab, "Applications of nanotechnology in the Oil & Gas industry: Latest trends worldwide & future challenges in Egypt," SPE North Africa Technical Conference and Exhibition (SPE-164716-MS), 2013.
https://doi.org/10.2118/164716-ms
[20] J. O. Oseh, M. N. A. Mohd Norddin, I. Ismail, A. O. Gbadamosi, A. Agi, and H. N. Mohammed, "A novel approach to enhance rheological and filtration properties of water–based mud using polypropylene–silica nanocomposite," Journal of Petroleum Science and Engineering, vol. 181, p. 106264, 2019.
https://doi.org/10.1016/j.petrol.2019.106264
[21] R. Rafati, S. R. Smith, A. Sharifi Haddad, R. Novara, and H. Hamidi, "Effect of nanoparticles on the modifications of drilling fluids properties: A review of recent advances," Journal of Petroleum Science and Engineering, 2018.
https://doi.org/10.1016/j.petrol.2017.11.067
[22] S. Jarmolińska, A. Feliczak-Guzik, and I. Nowak, "Synthesis, characterization and use of mesoporous silicas of the following types SBA-1, SBA-2, HMM-1 and HMM-2," Materials, vol. 13, no. 19, pp. 1–33, 2020.
https://doi.org/10.3390/ma13194385
[23] Q. A. Mahmood, B. A. Abdulmajeed, and R. Haldhar, "Oxidative Desulfurization of Simulated Diesel Fuel by Synthesized Tin Oxide Nano-Catalysts Support on Reduced Graphene Oxide," Iraqi Journal of Chemical and Petroleum Engineering, vol. 24, no. 4, pp. 83–90, 2023.
https://doi.org/10.31699/ijcpe.2023.4.8
[24] K. Tadanaga, K. Morita, K. Mori, and M. Tatsumisago, "Synthesis of monodispersed silica nanoparticles with high concentration by the Stöber process," Journal of Sol-Gel Science and Technology, vol. 68, no. 2, pp. 341–345, 2013.
https://doi.org/10.1007/s10971-013-3175-6
[25] M. Schneider, K. Cesca, D. Amorim, R. F. P. M. Moreira, D. Hotza, and E. Rodrigues, "Synthesis and characterization of silica-based nanofluids for enhanced oil recovery," Journal of Materials Research and Technology, 2023.
https://doi.org/10.1016/j.jmrt.2023.04.049
[26] M. Mirzaasadi, V. Zarei, M. Elveny, S. M. Alizadeh, V. Alizadeh, and A. Khan, "Improving the rheological properties and thermal stability of water-based drilling fluid using biogenic silica nanoparticles," Energy Reports, vol. 7, pp. 6162–6171, 2021.
https://doi.org/10.1016/j.egyr.2021.08.130
[27] Z. E. M. ALZubaidi, F. H. M. Almahdawi, and Y. M. F. Mukhtar, "Enhance the rheological properties of reservoir drilling fluid (RDF) using Fe₂O₃ as nanoparticle material," Iraqi Journal of Chemical and Petroleum Engineering, vol. 26, no. 1, pp. 147–153, 2025.
https://doi.org/10.31699/ijcpe.2025.1.15
[28] M. Maulani et al., "Optimizing the impact of rheological properties on bentonite pre-hydrated based drilling mud through the utilization of pre-hydration," IOP Conference Series: Earth and Environmental Science, vol. 1339, no. 1, 2024.
https://doi.org/10.1088/1755-1315/1339/1/012018
[29] H. A. Abbood and S. Al-Anssari, "Enhancement of water-based drilling fluid using novel composite of silica and alumina nanoparticles," South African Journal of Chemical Engineering, vol. 57, Jul. 2026.
https://doi.org/10.1016/j.sajce.2026.100872
[30] H. A. Abbood and S. Al-Anssari, "Eco-friendly synthesis of silica and alumina from waste materials and their application in improving water-based drilling mud," Chemical Papers, May 2026.
https://doi.org/10.1007/s11696-026-04922-2
[31] R. Pourrajab, M. Behbahani, and S. N. Moosavi, "Optimizing drilling fluid rheology with hybrid nanoparticles boron nitride and graphene nanosheets: an experimental study," Scientific Reports, Apr. 2026.
https://doi.org/10.1038/s41598-026-46779-1
[32] Ahmed Hullio, A. H. Tunio, W. Akhtar, M. A. Memon, and N. M. Gabol, "Enhancing the Rheological and Filtration Performance of Water-Based Drilling Fluids Using Silane-Coated Aluminum Oxide NPs," ACS Omega, vol. 10, no. 1, pp. 955–963, 2025.
https://doi.org/10.1021/acsomega.4c08116
[33] N. Uwaezuoke, U. C. Chukwuebuka, and A. A. Muhammed, "Evaluation of Kaolin Clay Polymeric Nanoparticles for Improved Water-Based Mud Properties," Oil and Gas: Science and Engineering, vol. 12, no. 1, pp. 36–45, 2024.
https://doi.org/10.11648/ogce.20241201.15
[34] L. Deng et al., "Synthesis and evaluation of selenium-doped nanocomposites in enhancing drilling fluid properties," Discover Nano, vol. 21, no. 1, Dec. 2026.
https://doi.org/10.1186/s11671-026-04446-4
[35] R. Doukeh et al., "Synthesis, Characterization, and Performance Evaluation of Nanocrystalline Metal Oxides for Shale Inhibition in Water-Based Drilling Fluids," Sustainable Chemistry, vol. 7, no. 1, p. 3, Jan. 2026.
https://doi.org/10.3390/suschem7010003
[36] A. Gowida, J. P. Shah, and S. Elkatatny, "Foam systems for underbalanced and geothermal drilling: a critical review of stability challenges and research frontiers," Journal of Petroleum Exploration and Production Technology, Jan. 2026.
https://doi.org/10.1007/s13202-025-02114-4
[37] Q.-B. Wang et al., "Zwitterionic-hydrophobic associating polymer for enhanced rheology and fluid-loss control in high-temperature, high-salinity water-based drilling fluids," Petroleum Science, Mar. 2026.
https://doi.org/10.1016/j.petsci.2026.03.042
[38] R. Dizayee, J. Ali, and H. Omar, "Performance Impact of the Nano-Colloidal Aphron-Based Drilling Fluids on Rheological and Filtration Properties," Processes, vol. 14, no. 4, Feb. 2026.
https://doi.org/10.3390/pr14040587
[39] Miao, L. Li, M. Leng, H. Zhang, H. Sun, and B. Huang, "Design and Performance Assessment of a Polymer-Based Filtration-Control System for High-Temperature, High-Density Water-Based Drilling Fluids," Processes, vol. 14, no. 9, p. 1326, Apr. 2026.
https://doi.org/10.3390/pr14091326
[40] A. Fattah, S. S. Basaloom, M. N. J. AlAwad, F. S. Altawati, and M. A. Almobarky, "Impact of Barite Nanoparticles on Barite Sag in Water-Based Drilling Fluids," Eng, vol. 7, no. 3, Mar. 2026.
https://doi.org/10.3390/eng7030102
[41] Z. Komekbay et al., "Sublethal Dermal Toxicity of Drilling Fluid and Its Effects on Hematological, Biochemical and Histopathological Parameters in Rats," Dose-Response, vol. 24, no. 2, Apr. 2026.
https://doi.org/10.1177/15593258261436773
[42] H. Fan et al., "Imbibition and Oil Drainage Mechanisms of Nanoparticle Compound Polymer Fracturing Fluids," Gels, vol. 12, no. 2, Feb. 2026.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 The Author(s). Published by College of Engineering, University of Baghdad.
This work is licensed under a Creative Commons Attribution 4.0 International License.
