Adsorption Kinetic and Isotherms Studies of Thiophene Removal from Model Fuel on Activated Carbon Supported Copper Oxide

Authors

  • Saad H. Ammar Chemical Engineering Department, College of Engineering, AL-Nahrain University, Iraq
  • Sama Ali Jaafar Chemical Engineering Department, College of Engineering, AL-Nahrain University, Iraq

DOI:

https://doi.org/10.31699/IJCPE.2017.2.7

Keywords:

Adsorptive desulfurization; activated carbon; copper; thiophene, kinetics, isotherms.

Abstract

In the present study, activated carbon supported metal oxides was prepared for thiophene removal from model fuel (Thiophene in n-hexane) using adsorptive desulfurization technique. Commercial activated carbon was loaded individually with copper oxide in the form of Cu2O/AC. A comparison of the kinetic and isotherm models of the sorption of thiophene from model fuel was made at different operating conditions including adsorbent dose, initial thiophene concentration and contact time. Various adsorption rate constants and isotherm parameters were calculated. Results indicated that the desulfurization was enhanced when copper was loaded onto activated carbon surface. The highest desulfurization percent for Cu2O/AC and origin AC at initial thiophene concentration of 500 ppm, adsorbent dose of 0.01 g/ml and equilibrium time of 5 hr were 87.4% and 53.4% respectively, for outlet concentration of 63 mg/L for copper oxide and 236 mg/L for original AC. Generally, the percent removal of thiophene increases with the increase in adsorbent dose and decrease with increase in initial thiophene concentration. The present study was mainly focusing on the kinetics and adsorption isotherms aspect; adsorption kinetics of thiophene onto activated carbon supported Cu2O adsorbent was closely represented by the second order kinetic model and Freundlich isotherms well represented the equilibrium adsorption of thiophene from model fuel.

References

Kim, J. H., Ma, X., Zhou, A., and Song, C. (2006). Ultra-deep desulfurization and denitrogenation of diesel fuel by selective adsorption over three different adsorbents: a study on adsorptive.

Mužic, M., and Sertić-Bionda, K. (2013). Alternative Processes for Removing Organic Sulfur Compounds from Petroleum Fractions. Chemical and Biochemical Engineering Quarterly, 27 (1), 101-108.‏

Campos‐Martin, J. M., Capel‐Sanchez, M. D. C., Perez‐Presas, P., and Fierro, J. L. G. (2010). Oxidative processes of desulfurization of liquid fuels. Journal of chemical technology and biotechnology, 85 (7), 879-890.‏

Soleimani, M., Bassi, A., and Margaritis, A. (2007). Biodesulfurization of refractory fossil fuels. Biotechnology advances, 25 (6), 570-596

Xiaolin, T., and Le Zheting, S. L. (2011). Deep desulfurization via adsorption by silver modified bentonite. China Petroleum Processing and Petrochemical Technology, 13, 16-20.

Ahmad, W., Ahmad, I., Ishaq, M., and Ihsan, K. (2014). Adsorptive desulfurization of kerosene and diesel oil by Zn impregnated montmorollonite clay. Arabian Journal of Chemistry.

Adeyi, A. A., and ABERUAGBA, F. (2012). Comparative analysis of adsorptive desulphurization of crude oil by manganese dioxide and zinc oxide. Research Journal of Chemical Sciences, 2 (8), 14-20.

Morozov, I. V., Znamenkov, K. O., Korenev, Y. M., and Shlyakhtin, O. A. (2003). Thermal decomposition of Cu (NO 3) 2· 3H 2 O at reduced pressures. Thermochimicaacta, 403 (2), 173-179.

Moosavi, E. S., Dastgheib, S. A., and Karimzadeh, R. (2012). Adsorption of thiophenic compounds from model diesel fuel using copper and nickel impregnated activated carbons. Energies, 5 (10), 4233-4250.

Seredych, M., and Bandosz, T. J. (2010). Adsorption of dibenzothiophenes on activated carbons with copper and iron deposited on their surfaces. Fuel Processing Technology, 91 (6), 693-701.

Seredych, M., and Bandosz, T. J. (2011). Investigation of the enhancing effects of sulfur and/or oxygen functional groups of nanoporous carbons on adsorption of dibenzothiophenes. Carbon, 49 (4), 1216-1224.‏

Lagergren, S. (1898). About the theory of so called adsorption of solute substances. Ksver Veterskapsakad Handl, 24, 1-6.

Ho, Y.S.; and McKay, G. (1999). Pseudo-second-order model for sorption processes. Process Biochemistry, 34 (5), 451-465.

Weber, W.J.; Asce, Jr J.M.; and Morris, J.C. (1963) Kinetics of adsorption on carbon from solutions. Journal of Sanitary Engineering Division of American Society of Civil Engineering, 89, 31-60. organic sulfur compounds in.

Low, M. J. D. (1960). Kinetics of Chemisorption of Gases on Solids. Chemical Reviews, 60 (3), 267-312.‏

Chien, S. H., and Clayton, W. R. (1980). Application of Elovich equation to the kinetics of phosphate release and sorption in soils. Soil Science Society of America Journal, 44 (2), 265-268.‏

Dada, A. O., Olalekan, A. P., Olatunya, A. M., and Dada, O. (2012). Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherms studies of equilibrium sorption of Zn2+ unto phosphoric acid modified rice husk. Journal of Applied Chemistry, 3 (1), 38-45..‏

‏Umpleby, R. J., Baxter, S. C., Bode, M., Berch, J. K., Shah, R. N., and Shimizu, K. D. (2001). Application of the Freundlich adsorption isotherm in the characterization of molecularly imprinted polymers. Analytica Chimica Acta, 435 (1), 35-42.‏

Downloads

Published

2017-06-30

How to Cite

Ammar, S. H., & Jaafar, S. A. (2017). Adsorption Kinetic and Isotherms Studies of Thiophene Removal from Model Fuel on Activated Carbon Supported Copper Oxide. Iraqi Journal of Chemical and Petroleum Engineering, 18(2), 83-93. https://doi.org/10.31699/IJCPE.2017.2.7

Publication Dates