Corrosion Inhibition of Low Carbon Steel in Different HCl Concentrations by Phenythiourea

Authors

  • Aprael S. Yaro
  • Nashwan A . Rashed
  • Ahmed S. Abdul-Hassan

DOI:

https://doi.org/10.31699/IJCPE.2007.1.7

Keywords:

phenythiourea low carbon steel corrosion inhibition

Abstract

Phenylthiourea  (PHTU),was  tested  as  inhibitor for  the  corrosion  of  low  carbon  steel  in different  HCI  acid concentration by mass loss ,and polarization measurements .it was found that (PHTU) is a good inhibitor for the corrosion of low carbon steel in 1,3,and 5N HCI solution ,and its inhibition efficiency (0) increases with its concentration and attains approximately 97% at l g/I .polarization curves indicate that (PHTU) acts as an anodic type inhibitor .the inhibitor was adsorbed on the low carbon steel surface according to the Langmuir adsorption isotherm model. Results show that the rate of corrosion of low carbon steel increased with increasing temperature over the range 30-60°C, both in the presence of inhibitor and its absence .it was found also that the inhibiting effect of the inhibitor is generally acid concentration independent.

Downloads

Published

2007-03-30

How to Cite

S. Yaro, A., A . Rashed, N., & S. Abdul-Hassan, A. (2007). Corrosion Inhibition of Low Carbon Steel in Different HCl Concentrations by Phenythiourea. Iraqi Journal of Chemical and Petroleum Engineering, 8(1), 47-50. https://doi.org/10.31699/IJCPE.2007.1.7

Publication Dates

Most read articles by the same author(s)