Interaction of Aqueous Cu2+ Ions with Granules of Crushed Concrete
DOI:
https://doi.org/10.31699/IJCPE.2019.1.5Keywords:
Sorption, Recycling, Concrete Demolition waste, Heavy metal ion, IsothermAbstract
The sorption of Cu2+ ions from synthetic wastewater using crushed concrete demolition waste (CCDW) which collected from a demolition site was investigated in a batch sorption system. Factors influencing on sorption process such as shaking time (0-300min), the initial concentration of contaminant (100-750mg/L), shaking speed (0-250 rpm), and adsorbent dosage (0.05-3 g/ml) have been studied. Batch experiments confirmed that the best values of these parameters were (180 min, 100 mg/l, 250 rpm, 0.7 g CCDW/100 ml) respectively where the achieved removal efficiency is equal to 100%. Sorption data were described using four isotherm models (Langmuir, Freundlich, Redlich-Peterson, and Radke-Prausnitz). Results proved that the pure adsorption and precipitation are the main mechanisms for removal of copper ions from aqueous solution onto CCDW and sorption data can be represented by Langmuir and Radke-Prausnitz model. The copper ion was successfully removed from aqueous solution during batch experiments using CCDW in the particle size range 2–1 mm. Scanning electron microscopy detected that the removal of Cu2+ was found to arise from surface precipitation.
Received on 23/10/2018
Accepted on 20/01/2019
Published on 30/03/2019
References
H. Demiral, and C. Güngör, “Adsorption of copper(II) from aqueous solutions on activated carbon prepared from grape bagasse,” Journal of Cleaner Production, Vol. 124, pp. 103-113, Feb. 2016.
X. Hung, M. Sillianpaa, B. Duo, E. T. Gjessing, “Water quality in the Tibetan Plateau: Metal contents of four selected rivers,” Journal of Environmental Pollution, Vol. 156, no. 2, pp. 270-277, Nov. 2008.
E. Demirbas, N. Dizge, M. T. Sulak, M. Kobya, “Adsorption kinetics and equilibrium of copper from aqueous solutions using hazelnut shell activated carbon,” Journal of Chemical Engineering, Vol. 148, no. 2-3, pp. 480-487, May. 2009.
E. Eren, “Removal of copper ions by modified Unye clay, Turkey,” Journal of Hazardous Materials, Vol. 159, no. 2-3, pp. 235-244, Nov. 2008.
F. Bouhamed, Z. Elouear, J. Bouzid, “Adsorptive removal of copper(II) from aqueous solutions on activated carbon prepared from Tunisian date stones: Equilibrium, kinetics and thermodynamics,” Journal of the Taiwan Institute of Chemical Engineers, Vol. 43, no. 5, pp. 741-749, Sep. 2012.
M. A. Grace, E. Clifford, M. G. Haely, “The potential for the use of waste products from a variety of sectors in water treatment processes,” Journal of Cleaner Production, Vol. 137, no. 20, pp. 788-802, Nov. 2016.
W. E. Razzell, “Chemical fixation, solidification of hazardous waste,”Journal of Waste Management & Research, Vol. 8, no. 2, pp. 105-111, Apr. 1990.
F. P. Glasser, “Fundamental aspects of cement solidification and stabilization,” Journal of Hazardous Materisl,Vol. 52, no. 2-3, pp. 151-170, Apr. 1997.
A. Townshend, E. Jackwerth,” Precipitation of major constituents for trace preconcentration: Potential and problems, The Scientific Journal of IUPAC, Vol. 61, no. 9, Jan. 2009.
C. Zhu, S. Martin, R. Ford, N. Nuhfer, “Experimental and modeling studies of coprecipitation as an attenuation mechanism for radionuclides, metals, and metalloid mobility,” Apr. 2003.
M. H. El-Awady, T. M. Sami, “Removal of Heavy Metals by Cement Kiln Dust,” Bulletin of environmental contamination and toxicology, Vol. 59, no. 4, pp, 603-610, Oct. 1997.
O. Hamdaoui, E. Naffrechoux, “Modeling of adsorption isotherms of phenol and chlorophenols onto granular activated carbon: Part I. Two-parameter models and equations allowing determination of thermodynamic parameters,” Journal of Hazardous Material, Vol. 147, no. 1-2, pp. 381-394. Aug. 2007.
K.Y. Foo, B. H. Hameed, “Insights into the modeling of adsorption isotherm systems,” Chemical Engineering Journal, Vol. 156, no. 1, pp. 2-10, Jan. 2010.
B. Subramanyam, D. Ashutosh, “Adsorption Isotherm Modeling of Phenol onto Natural soils – Applicability of Various Isotherm Models,” International Journal of Environmental Research, Vol. 6, no, 1, pp. 265-276, win. 2012.
S. Shrivastava, “Medical Device Materials: Proceedings from the Materials and Processes for Medical Devices Conference Anaheim, California,” Asm International, Sep. 2003.
N. J. Coleman, W. E. Lee, and I. J. Slipper, “Interactions of aqueous Cu2+, Zn2+ and Pb2+ ions with crushed concrete fines,” Journal of hazardous materials, Vol. 12, no. 1-3, pp. 203-213, Feb. 2005.
B. Yasemine, T. Zeki, “Removal of heavy metals from aqueous solution by sawdust adsorption,” Journal of Environmental Sciences, Vol. 19, no. 2, pp. 160-166, sep. 2007.
S. Kagne, S. Jagtap, P. Dhawade, S. P. Kamble, S. Devotta, S. S. Rayalu, “Hydrated cement: A promising adsorbent for the removal of fluoride from aqueous solution,” Journal of Hazardous Materials, Vol. 154, no. 1-3, pp. 88-95, Sep. 2008.
B. O. Opeolu, O. Bamgbose, O. S. Fatoki, “Zinc abatement from simulated and industrial wastewaters using sugarcane biomass,” Water SA, Vol. 37, no. 3, pp. 313-320, Aug. 2011.
J. Anwar, U. Shafique, W. U. Zaman, M. Salamn, A. Dar, S. Anwar, “Removal of Pb(II) and Cd(II) from water by adsorption on peels of banana,” Journal of Bioresource Technology, Vol. 101. no. 6, pp. 1752-1755, Mar. 2010,
B.M.W.P.K.Amarasinghe, R. A. Williams, “Tea waste as a low cost adsorbent for the removal of Cu and Pb from wastewater," Journal of Chemical Engineering, Vol. 132, no. 1-3, pp. 299-309, Aug. 2007.
H. A. Aziz, M. N. Adlan, K. S. Ariffin, “Heavy metals (Cd, Pb, Zn, Ni, Cu and Cr (III)) removal from water in Malaysia: post treatment by high quality limestone,” journal of Bioresource Technology, vol. 99, no. 6, pp. 1578-1583, Apr. 2008.
Ray. W. Brown, C. Gonzales, M. J. Hooper, A. C. Bayat, A. M. Fornerette, T. J. McBride, T. Longoria, H. W. Mielke, “Soil lead (Pb) in residential transects through Lubbock, Texas: a preliminary assessment,” Journal of Environmental Geochemistry and Health, Vol. 30, no. 6, pp. 541-547, Dec. 2008.
A. M. Brown, “A step-by-step guide to non-linear regression analysis of experimental data using a Microsoft Excel spreadsheet,” Journal of Computer Methods and Programs in Biomedicine, Vol. 65, no. 3, pp. 191-200, Jun. 2001.
F. Colangelo, R. Cioffi, “Use of cement kiln dust, blast furnace slag and marble sludge in the manufacture of sustainable artificial aggregates by means of cold bonding pelletization,” Journal of Materials Science, Vol. 6, no. 8, pp.3139-3159. Jul. 2013.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
