Effect of Modified Hybrid Nanoparticles on the Properties of Base Oil

Authors

  • Mustafa Raad Petroleum Research and Development Center PRDC, Ministry of Oil, Baghdad, Iraq
  • Basma Abbas Abdulmajeed Chemical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq

DOI:

https://doi.org/10.31699/IJCPE.2022.1.1

Keywords:

Oil 40 stock, Lubricating Oil, Nanoparticles, Oleic acid, Viscosity Index, Flash Point

Abstract

 

Nanomaterials have an excellent potential for improving the rheological and tribological properties of lubricating oil. In this study, oleic acid was used to surface-modify nanoparticles to enhance the dispersion and stability of Nanofluid. The surface modification was conducted for inorganic nanoparticles (NPs) TiO₂ and CuO with oleic acid (OA) surfactant, where oleic acid could render the surface of TiO2-CuO hydrophobic. Fourier transform infrared spectroscopy (FTIR), and Scanning electron microscopy (SEM) were used to characterize the surface modification of NPs. The main objective of this study was to investigate the influence of adding modified TiO₂-CuO NPs with weight ratio 1:1 on thermal-physical properties such as kinematic viscosity, viscosity index (VI), pour point, and flash point of Iraqi base oil (40 stock) and nano-lubricating oil. The kinematic viscosity of base oil at 40 °C and 100°C increased with high concentrations of modified TiO₂-CuO NPs. The highest value of VI of base oil 40 stock at 0.8 wt. % of modified TiO₂-CuO NPs was 108.5. The results showed that the flashpoint value increased with the increased concentration of modified TiO₂-CuO NPs of base oil 40, where the highest value was 220 °C. The pour point of nano lubricating oil base with 0.8 wt. % of modified TiO₂-CuO NPs showed decreasing from -12 °C to -15 °C of base oil 40.

References

I. Mangas, M. A. Sogorb, and E. Vilanova, Lubricating Oils, Third Edit., vol. 3. Elsevier, 2014.

H. Leffmann, The petroleum handbook, vol. 189, no. 1. 1920.

M. Esso, Lubrication in Practice. London, UK: The Macmillan Press Limited, 1972.

W. Dresel, Lubricants and Lubrication, 2nd Ed. Ludwigshafen, Grmany: Deutsche Nationalbibliothek, 2007.

A. Çelik et al., Lubricant Blending and Quality Assurance, vol. 1, no. 1. 2018.

S. Hisham et al., “Hybrid nanocellulose-copper (II) oxide as engine oil additives for tribological behaviour improvement,” Molecules, vol. 25, no. 13, 2020, doi: 10.3390/molecules25132975.

Deepika, “Nanotechnology implications for high performance lubricants,” SN Appl. Sci., vol. 2, no. 6, 2020, doi: 10.1007/s42452-020-2916-8.

F. Ilie and C. Covaliu, “Tribological properties of the lubricant containing titanium dioxide nanoparticles as an additive,” Lubricants, vol. 4, no. 2, pp. 12–14, 2016, doi: 10.3390/lubricants4020012.

M. I. H. C. Abdullah et al., “Improving engine oil properties by dispersion of hBN/Al2O3 nanoparticles,” Appl. Mech. Mater., vol. 607, pp. 70–73, 2014, doi: 10.4028/www.scientific.net/AMM.607.70.

N. F. Azman and S. Samion, “Dispersion Stability and Lubrication Mechanism of Nanolubricants: A Review,” Int. J. Precis. Eng. Manuf. - Green Technol., vol. 6, no. 2, pp. 393–414, 2019, doi: 10.1007/s40684-019-00080-x.

S. B. Mousavi, S. Z. Heris, and P. Estellé, “Experimental comparison between ZnO and MoS2 nanoparticles as additives on performance of diesel oil-based nano lubricant,” Sci. Rep., vol. 10, no. 1, pp. 1–17, 2020, doi: 10.1038/s41598-020-62830-1.

W. Y. P. Das, Sarit K, Stephen U. S. Choi, Nanofluid science and technology. Canada: A JOHN WILEY & SONS, INC, 2008.

X. Q. Wang and A. S. Mujumdar, “A review on nanofluids - Part II: Experiments and applications,” Brazilian J. Chem. Eng., vol. 25, no. 4, pp. 631–648, 2008, doi: 10.1590/S0104-66322008000400002.

V. S.Korada, & N. H. B.Hamid, Engineering Applications of Nanotechnology, no. April. 2017.

A. R. I. Ali and B. Salam, “A review on nanofluid: preparation, stability, thermophysical properties, heat transfer characteristics and application,” SN Appl. Sci., vol. 2, no. 10, 2020, doi: 10.1007/s42452-020-03427-1.

T. Shah, H. Koten, and H. Ali, “Performance effecting parameters of hybrid nanofluids,” in Hybrid Nanofluids for Convection Heat Transfer, Istanbul, Turkey: INC, 2020, pp. 179–213.

H. M. Ali, Ed., Hybrid Nanofluids for Convection Heat Transfer, 1st ed. Dhahran: Elsevier, Academic Press, 2020.

Z. Li and Y. Zhu, “Surface-modification of SiO2 nanoparticles with oleic acid,” Appl. Surf. Sci., pp. 315–320, 2003.

M. Kumar, A. Afzal, and M. K. Ramis, “Investigation of physicochemical and tribological properties of tio2 nano-lubricant oil of different concentrations,” Tribologia, vol. 35, no. 3, pp. 6–15, 2017.

N. Baek, Y. T. Kim, J. E. Marcy, S. E. Duncan, and S. F. O’Keefe, “Physical properties of nanocomposite polylactic acid films prepared with oleic acid modified titanium dioxide,” Food Packag. Shelf Life, vol. 17, no. May, pp. 30–38, 2018, doi: 10.1016/j.fpsl.2018.05.004.

Sigma-Aldrich, “IR Spectrum Table,” Sigma-Aldrich. p. 1, 2019, Retrieved from https://www.sigmaaldrich.com/technical-documents/articles/biology/ir-spectrum-table.html#ir-table-by-compound%0A.

Y. zhen Lv, C. Li, Q. Sun, M. Huang, C. rong Li, and B. Qi, “Effect of Dispersion Method on Stability and Dielectric Strength of Transformer Oil-Based TiO2 Nanofluids,” Nanoscale Res. Lett., vol. 11, no. 1, pp. 4–9, 2016, doi: 10.1186/s11671-016-1738-5.

F. Parvizian, F. Ansari, and S. Bandehali, “Oleic acid-functionalized TiO 2 nanoparticles for fabrication of PES-based nanofiltration membranes,” Chemical Engineering Research and Design vol. 6, pp. 433–441, 2020.

A. El-Trass, H. Elshamy, I. El-Mehasseb, and M. El-Kemary, “CuO nanoparticles: Synthesis, characterization, optical properties and interaction with amino acids,” Appl. Surf. Sci., vol. 258, no. 7, pp. 2997–3001, 2012, doi: 10.1016/j.apsusc.2011.11.025.

S. Ashokan, V. Ponnuswamy, P. Jayamurugan, and Y. V. S. Rao, “Fabrication and characterization of CuO nanoparticles : Its Humidity sensor application,” vol. 1, no. 1, pp. 11–23, 2015.

Y. Gao, G. Chen, Y. Oli, Z. Zhang, and Q. Xue, “Study on tribological properties of oleic acid-modified TiO2 nanoparticle in water,” Wear, vol. 252, no. 5–6, pp. 454–458, 2002, doi: 10.1016/S0043-1648(01)00891-2.

K. Gu, B. Chen, and Y. Chen, “Preparation and tribological properties of lanthanum-doped TiO2 nanoparticles in rapeseed oil,” J. Rare Earths, vol. 31, no. 6, pp. 589–594, 2013, doi: 10.1016/S1002-0721(12)60325-1.

M. Jafarpour, M. Ghahramaninezhad, and A. Rezaeifard, “Synthesis, characterization and catalytic activity of oleic acid-coated TiO2 nanoparticles carrying MoO2 (acac)2 in the oxidation of olefins and sulfides using economical peroxides,” New J. Chem., vol. 38, no. 7, pp. 2917–2926, 2014, doi: 10.1039/c4nj00267a.

X. Song, S. Zheng, J. Zhang, W. Li, Q. Chen, and B. Cao, “Synthesis of monodispersed ZnAl 2O 4 nanoparticles and their tribology properties as lubricant additives,” Mater. Res. Bull., vol. 47, no. 12, pp. 4305–4310, 2012, doi: 10.1016/j.materresbull.2012.09.013.

C. P. Koshy, P. K. Rajendrakumar, and M. V. Thottackkad, Evaluation of the tribological and thermo-physical properties of coconut oil added with MoS2 nanoparticles at elevated temperatures, vol. 330–331. Elsevier, 2015.

M. R. Fahad and B. A. Abdulmajeed, “Experimental investigation of base oil properties containing modified TiO2/CuO nanoparticles additives,” J. Phys. Conf. Ser., vol. 1973, no. 1, pp. 0–12, 2021, doi: 10.1088/1742-6596/1973/1/012089.

M. K. A. Ali, H. Xianjun, L. Mai, C. Qingping, R. F. Turkson, and C. Bicheng, “Improving the tribological characteristics of piston ring assembly in automotive engines using Al2O3 and TiO2 nanomaterials as nano-lubricant additives,” Tribol. Int., vol. 103, pp. 540–554, 2016, doi: 10.1016/j.triboint.2016.08.011.

C. Pownraj and A. Valan Arasu, Effect of dispersing single and hybrid nanoparticles on tribological, thermo-physical, and stability characteristics of lubricants: a review, vol. 143, no. 2. Springer International Publishing, 2021.

Downloads

Published

2022-03-30

How to Cite

Raad, M., & Abbas Abdulmajeed, B. (2022). Effect of Modified Hybrid Nanoparticles on the Properties of Base Oil. Iraqi Journal of Chemical and Petroleum Engineering, 23(1), 1-7. https://doi.org/10.31699/IJCPE.2022.1.1

Publication Dates