Determining Optimum Oil Separator Size and Optimum Operating Pressure

Authors

  • Ghanim Madeeh Al-Zubaidy Petroleum Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq

DOI:

https://doi.org/10.31699/IJCPE.2022.2.6

Keywords:

flash evaporation, insulators, chemical composition

Abstract

The optimum separators operating pressure is determined by using flash calculations and equilibrium ratios. In this study, the optimum separator size for Jambur field is calculated by using equations introduced by Arnold and Stewart and API12J Specification [1]. Because Jambur field has a high production rate two conditions are taken in the study to determine separator size, first based on production rate 80,000 bbl/day and second based on split the production between two banks A and B (40,000 bbl/day for each bank). The calculation resulted in optimum separator pressure for the first stage of 700 psi, and the second stage of 300 psi, and the third stage of 120 psi. The results show that as the number of stages increased above three-stage for Jambur field less incremental liquid recovery achieved and this will not cover the cost of adding an extra stage.

References

Arnold, K. and Stewart, M. Surface Production Operations, Design of Oil Handling Systems and Facilities. THIRD EDITION (2008).

Arnold, K. and Stewart, M. Design of oil-handling systems and facilities. Gulf Professional Publishing, 1998.

Raad Mohammed Jawad. Alkhalissi, " Single Well Coning Problem andApplicable Solutions”. Iraqi Journal of Chemical and Petroleum Engineering. (2015).

Kegang Ling, (2013). New Method to Estimate Surface Separator Optimum Operating Pressures. SPE -163111- MS.

A. . k. Hamadi and .Imad . . A.Kheioon, “Modeling of Intelligent Control System for Liquid Level in Multi-Stage Separator Arrangement in Oil and Natural Gas Industry”, UTJES, vol. 9, no. 2, pp. 1–7, Apr. 2019.

Arnold, K. and Stewart, M.. Designing Oil and Gas Production Systems, How to size and Select Two PhaTwo-Phasetors. SPE reprint series (Production Facilities) 25: 1989, 91-96.

Chilingarian, G.V. and Beeson, C.M. ed. 1969. Surface Operation in Petroleum Production. New York: Elsevier.

Svercek, W. Y. and Monnery W. D. (1993). Design Two Phase Separators within the Right Limits. Chemical Engineering Progress, 53-60.

Bahadori, A., Vuthaluru, H.B., and Mokhatab, s.2008. Optimizing Separators Pressures in the Multistage Crude Oil Production Unit. Asia-pac. J. Chem. Eng. 3(4): 380-386.

Al-Jawad, M.S. and Hassan, O.F. 2010 a. Correlating Optimum Stage Pressure for Sequential Separator Systems. SPE Proj Fac & Const 5 (1): 13-16. SPE-118225-PA.

Ghanim M. Farman, Maha Raouf Abdulamir. "Formulation of New Equation to Estimate Productivity Index of Horizontal Wells". Iraqi Journal of Chemical and Petroleum Engineering. (2014).

Downloads

Published

2022-06-30

How to Cite

Al-Zubaidy, G. M. (2022). Determining Optimum Oil Separator Size and Optimum Operating Pressure. Iraqi Journal of Chemical and Petroleum Engineering, 23(2), 43-46. https://doi.org/10.31699/IJCPE.2022.2.6

Publication Dates