Studying and Analyzing Operating Conditions of Hollow Fiber Membrane Preparation Process: A Review Paper

Authors

  • Zaid Rashad Chemical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq

DOI:

https://doi.org/10.31699/IJCPE.2022.2.7

Keywords:

Hollow fiber membranes, phase inversion, ultrafiltration, polymers

Abstract

Polymeric hollow fiber membrane is produced by a physical process called wet or dry/wet phase inversion; a technique includes many steps and depends on different factors (starting from selecting materials, end with post-treatment of hollow fiber membrane locally manufactured). This review highlights the most significant factors that affect and control the characterization and structure of ultrafiltration hollow fiber membranes used in different applications.    

   Three different types of polymers (polysulfone PSF, polyethersulfone PES or polyvinyl chloride PVC) were considered to study morphology change and structure of hollow fiber membranes in this review. These hollow fiber membranes were manufactured with different process conditions and a reasonable starting point for factors remained constant to study the changing effect of specific factors.

 

References

M. I. Mustaffar, A. F. Ismail, and R. M. Illias. "Study on the effect of polymer concentration on hollow fiber ultrafiltration membrane performance and morphology." In Regional Symposium on Membrane Science and Technology, Malaysia. 2004.

M. S. M. Ali, "Development of integrally skinned polysulfone ultrafiltration membrane: effect of casting parameter." PhD diss., MSc. Thesis, University Sains Malaysia, 2005.

Van Vught, F. A., Willem Franciscus Catherina Kools, and België te Hoogstraten. "Membrane formation by phase inversion in multicomponent polymer system." PhD diss., University of Twente, 1998.

Nunes, Suzana Pereira, and Klaus-Viktor Peinemann. "Membrane technology in the chemical industry second." Environmental Engineering and Management Journal 6, no. 1, 75-76, 2007.

S. A Altınkaya, "Modeling of asymmetric membrane formation by a combination of dry/wet phase inversion processes." Desalination 2006.

W. Chinpa,. "Preparation and characterization of an asymmetric porous poly (vinyl chloride)/poly (methyl methacrylate-comethacrylic acid) membrane." ScienceAsia 34 385-389, 2008.

A. Nazif, H. Karkhanechi, E. Saljoughi, S. Mahmoud Mousavi and H. Matsuyama, "Effective Parameters on Fabrication and Modification of Braid Hollow Fiber Membranes: A Review." Membranes 11, no. 11, 884, 2021.

Ali Behboudi, Sanaz Ghiasi, Toraj Mohammadi, Mathias Ulbricht "Preparation and characterization of asymmetric hollow fiber polyvinyl chloride (PVC) membrane for forward osmosis application." Separation and Purification Technology 270 2021: 118801.

J. Tian, Z. Chen, Y. Yang, H. Liang, J. Nan, and G. Li, "Consecutive chemical cleaning of fouled PVC membrane using NaOH and ethanol during ultrafiltration of river water." Water Research 44, no. 1, pp. 59-68, 2010.

M. Khayet, M.C. García-Payoa, F.A. Qusayb, and M.A. Zubaidy, "Structural and performance studies of poly (vinyl chloride) hollow fiber membranes prepared at different air gap lengths." Journal of Membrane Science 330, no. 1-2, pp.30-39, 2009.

Ullmann's Encyclopedia of Industrial Chemistry, 6th Edition, Wiley Inter Science, Weinheim, 2002.

N. K. Taieh, "Preparation and Characterization of PVC Hollow Fiber Membranes for Ultrafiltration Application", MSc. Thesis, TECHNICAL COLLEGE-BAGHDAD, Iraq, 2010.

A. MANSOURIZADEH1 & A. FAUZI ISMAIL, "EFFECTS OF FABRICATION PARAMETERS ON THE MORPHOLOGY OF POROUS POLYSULFONE HOLLOW FIBER MEMBRANES.", Jurnal Teknologi, 49(F), pp. 81–89, Dis. 2008.

Tamino people and molecules, "Dimethylacetamide Technical Data Sheet", Retrieved from https://www.eastman.com/pages/taminco.aspx march, 2011

D. Wang, W.K. Teo a, and K. Li, "Preparation and characterization of high-flux polysulfone hollow fibre gas separation membranes." Journal of membrane science 204, no. 1-2, pp.247-256, 2002.

F. M. Hussein, A. S. Merzah, and Z. W. Rashad, “PREPARATION OF PVC HOLLOW FIBER MEMBRANE USING (DMAC/ACETONE)”, IJCPE, vol. 15, no. 4, pp. 81–87, Dec. 2014.

A. Al-Obaidy, “A Morphological Study of Alumina Hollow Fiber Membrane”, IJCPE, vol. 17, no. 3, pp. 117–123, Sep. 2016.

P. Aptel, N. Abidine, F. Ivaldi, J.P. Lafaille, "Polysulfone hollowfibres-effect of spinning conditions on ultrafiltration properties", J. Membr. Sci. 22, pp. 199–215, 1985.

G.C. East, J.E. McIntyre, V. Rogers, S.C. Senn, "Production of porous hollow polysulfone fibers for gas separation, in: Proceedings of the Fourth BOC" Priestly Conference, 62., Royal Society of Chemistry, London, 1986.

H. Kim, Y.I. Park, J. Jagel, K.H. Lee, "The effects of spinning conditions on the structure formation and the dimension of the hollow-fiber membranes and their relationship with the permeability in dry–wet spinning technology", J. Appl. Polymer Sci. 57 (1995) 1637–1645.

N.H.A. Tsai, D.H. Huang, S.C. Fan, Y.C. Yang, C.L. Li, K.R. Lee, J.Y. Lai, Investigation of surfactant addition effect on the vapor permeation of aqueous ethanol mixtures through polysulfone hollow fiber membranes, J. Membr. Sci. 198 (2002) 245–258.

X. Miao, S. Sourirajan, H. Zhang,W.W.Y. Lau, "Production of polyethersulfone hollow fiber ultrafiltration membranes. Part I. Effects of water (internal coagulant) flow rate and length of air gap", Sep. Sci. Technol. 31 (1996) 141–156.

T.S. Chung, X. Hu, Effect of air gap distance on the morphology and thermal properties or polyethersulfone hollow fibers, J. Appl. Polymer Sci. 66 (1997) 1067–1077.

Z. W. Rashad, "Operating System for Preparation Hollow Fiber Membranes Using for Water Treatment" project research H.D., Technical Collage Baghdad, 2012.

Y. Yang, D.Yang, S. Zhang, J. Wang, and X. Jian, "Preparation and characterization of poly (phthalazinone ether sulfone ketone) hollow fiber ultrafiltration membranes with excellent thermal stability." Journal of membrane science 280, no. 1-2 (2006): 957-968.

Downloads

Published

2022-06-30

How to Cite

Rashad, Z. (2022). Studying and Analyzing Operating Conditions of Hollow Fiber Membrane Preparation Process: A Review Paper . Iraqi Journal of Chemical and Petroleum Engineering, 23(2), 47-53. https://doi.org/10.31699/IJCPE.2022.2.7

Publication Dates