Textural Properties Characterization for NaX and FeX Zeolites by Nitrogen Adsorption-desorption Technique

Authors

  • Sanarya K. Kamal Chemical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq
  • Ammar S. Abbas Chemical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq

DOI:

https://doi.org/10.31699/IJCPE.2022.4.5

Keywords:

ion-exchange; mesoporous; pore size distribution; surface area; pore diameter; isotherms; average pore volume

Abstract

The zeolite's textural properties have a significant effect on zeolite's effectiveness in the different industrial processes. This research aimed to study the textual properties of the NaX and FeX zeolites using the nitrogen adsorption-desorption technique at a constant low temperature. According to the International Union of Pure and Applied Chemistry, the adsorption-desorption isotherm showed that the studied materials were mixed kinds I/II isotherms and H3 type hysteresis. The Brunauer-Emmett-Teller isotherm was the best model to describe the nitrogen adsorption-desorption better than the Langmuir and Freundlich isotherms. The obtained adsorption capacity and Brunauer-Emmett-Teller surface area values for NaX were greater than FeX. According to the Kelvin equation, Barrett, Joyner, and Halenda model was used to determine pore size distribution, diameter, and average pore volume for the selected zeolites. The pore size distribution for NaX was wider than FeX zeolites, the pore diameter for NaX was less than FeX, and the average pore volume for FeX was greater than the value of NaX average pore volume. The comparative study was carried out with the previous studies, and the comparison showed that the textual properties of the modified zeolites agreed with other studies.

Author Biographies

  • Sanarya K. Kamal, Chemical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq

     

     

  • Ammar S. Abbas, Chemical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq

     

     

References

A. Mhemeed, "A General Overview on the Adsorption," Indian J. Nat. Sci., vol. 9, no. 51, pp. 16127–16131, 2018.

P. Panneerselvam, N. Thinakaran, K. V. Thiruvenkataravi, M. Palanichamy, and S. Sivanesan, "Phosphoric acid modified-Y zeolites: A novel, efficient and versatile ion exchanger," J. Hazard. Mater., vol. 159, no. 2–3, pp. 427–434, Nov. 2008, doi: 10.1016/j.jhazmat.2008.02.033.

D. W. Astuti, Mudasir, and N. H. Aprilita, "Preparation and characterization adsorbent based on zeolite from Klaten, Central Java, Indonesia," J. Phys. Conf. Ser., vol. 1156, no. 1, p. 012002, Jan. 2019, doi: 10.1088/1742-6596/1156/1/012002.

I. W. Nah, K.-Y. Hwang, and Y.-G. Shul, "A simple synthesis of magnetically modified zeolite," Powder Technol., vol. 177, no. 2, pp. 99–101, Aug. 2007.

A. A. Mohammed and M. K. Baki, "Separation Benzene and Toluene from BTX using Zeolite 13X," Iraqi J. Chem. Pet. Eng., vol. 9, no. 3, pp. 17–22, 2008.

A. H. A. K. Mohammed. and M. M. Abdul-Raheem, "Adsorption of BTX Aromatic from Reformate by 13X Molecular Sieve," Iraqi J. Chem. Pet. Eng., vol. 9, no. 4, pp. 13–20, 2008.

H. Mousavi, J. Towfighi Darian, and B. Mokhtarani, "Enhanced nitrogen adsorption capacity on Ca2+ ion-exchanged hierarchical X zeolite," Sep. Purif. Technol., vol. 264, no. September 2020, p. 118442, Jun. 2021, doi: 10.1016/j.seppur.2021.118442.

Z. A. Hammood, T. F. Chyad, and R. Al-Saedi, "Adsorption Performance of Dyes Over Zeolite for Textile Wastewater Treatment," Ecol. Chem. Eng. S, vol. 28, no. 3, pp. 329–337, Sep. 2021.

S. K. A. Barno, H. J. Mohamed, S. M. Saeed, M. J. Al-Ani, and A. S. Abbas, "Prepared 13X Zeolite as a Promising Adsorbent for the Removal of Brilliant Blue Dye from Wastewater," Iraqi J. Chem. Pet. Eng., vol. 22, no. 2, pp. 1–6, Jun. 2021.

T. P. Belova, "Adsorption of heavy metal ions (Cu2+, Ni2+, Co2+ and Fe2+) from aqueous solutions by natural zeolite," Heliyon, vol. 5, no. 9, p. e02320, Sep. 2019, doi: 10.1016/j.heliyon.2019.e02320.

L. F. de Magalhães, G. R. da Silva, and A. E. C. Peres, "Zeolite Application in Wastewater Treatment," Adsorpt. Sci. Technol., vol. 2022, pp. 1–26, Feb. 2022, doi: 10.1155/2022/4544104.

E. Erdem, N. Karapinar, and R. Donat, "The removal of heavy metal cations by natural zeolites," J. Colloid Interface Sci., vol. 280, no. 2, pp. 309–314, Dec. 2004, doi: 10.1016/j.jcis.2004.08.028.

H. L. Tran, M. S. Kuo, W. D. Yang, and Y. C. Huang, "Study on Modification of NaX Zeolites: The Cobalt (II)-Exchange Kinetics and Surface Property Changes under Thermal Treatment," J. Chem., vol. 2016, no. Ii, 2016, doi: 10.1155/2016/1789680.

E. Asedegbega-Nieto, E. Díaz, A. Vega, and S. Ordóñez, “Transition metal-exchanged LTA zeolites as novel catalysts for methane combustion,” Catal. Today, vol. 157, no. 1–4, pp. 425–431, Nov. 2010, doi: 10.1016/j.cattod.2010.05.032.

E. V. Kuznetsova, E. N. Savinov, L. A. Vostrikova, and V. N. Parmon, "Heterogeneous catalysis in the Fenton-type system FeZSM-5/H2O2," Appl. Catal. B Environ., vol. 51, no. 3, pp. 165–170, Aug. 2004, doi: 10.1016/j.apcatb.2004.03.002.

B. A. Alshahidy and A. S. Abbas, "Comparative Study on the Catalytic Performance of a 13X Zeolite and its Dealuminated Derivative for Biodiesel Production," Bull. Chem. React. Eng. Catal., vol. 16, no. 4, pp. 763–772, Dec. 2021, doi: 10.9767/bcrec.16.4.11436.763-772.

B. A. Alshahidy and A. S. Abbas, "Preparation and modification of 13X zeolite as a heterogeneous catalyst for esterification of oleic acid," AIP Conf. Proc., vol. 2213, no. March, 2020.

A. Gęsikiewicz-Puchalska et al., "Changes in porous parameters of the ion exchanged x zeolite and their effect on co2 adsorption," Molecules, vol. 26, no. 24, 2021, doi: 10.3390/molecules26247520.

Y. Zeng, "Fundamental Study of Adsorption and Desorption Process in Porous Materials with Functional Groups," p. 122, 2016.

M. Alaqarbeh, "Adsorption Phenomena : Definition , Mechanisms , and Adsorption Types : RHAZES : Green and Applied Chemistry Adsorption Phenomena : Definition , Mechanisms , and Adsorption Types : Short Review," no. September, 2021, doi: 10.48419/IMIST.PRSM/rhazes-v13.28283.

R. T. Yang, "Adsorbents: Fundamentals and Applications," Wiley-Interscience, 2003.

S. M. Gawande, N. S. Belwalkar, and A. A. Mane, "Adsorption and its Isotherm – Theory," Int. J. Eng. Res., vol. 6, no. 6, p. 312, 2017, doi: 10.5958/2319-6890.2017.00026.5.

G. F. Bennett, Partition and Adsorption of Organic Contaminants in Environmental Systems, vol. 98, no. 1–3. 2003.

M. A. Al-Ghouti and D. A. Da'ana, "Guidelines for the use and interpretation of adsorption isotherm models: A review," J. Hazard. Mater., vol. 393, no. February, p. 122383, Jul. 2020, doi: 10.1016/j.jhazmat.2020.122383.

M. Thommes et al., "Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)," Pure Appl. Chem., vol. 87, no. 9–10, pp. 1051–1069, 2015, doi: 10.1515/pac-2014-1117.

K. Sing, "The use of nitrogen adsorption for the characterisation of porous materials," Colloids Surfaces A Physicochem. Eng. Asp., vol. 187–188, pp. 3–9, Aug. 2001, doi: 10.1016/S0927-7757(01)00612-4.

B. Kurji, A. Abbas, and I. Marshes Research Center, "Comparative Study of Textural Properties for Various Silica by Nitrogen Adsorption-desorption Technique," Egypt. J. Chem., 2022, doi: https://dx.doi.org/10.21608/ejchem.2022.125169.5568.

A. I. Moral-Rodríguez et al., "Tailoring the textural properties of an activated carbon for enhancing its adsorption capacity towards diclofenac from aqueous solution.," Environ. Sci. Pollut. Res. Int., vol. 26, no. 6, pp. 6141–6152, Feb. 2019, doi: 10.1007/s11356-018-3991-x.

M. N. Alaya, a M. Youssef, M. Karman, and H. E. A. El-aal, "Textural properties of Activated Carbons from Wild Cherry Stones as Determined by Nitrogen and Carbon Dioxide Adsorption," vol. 7, no. 1, pp. 9–18, 2006.

H. Hammoudi, S. Bendenia, K. Marouf-Khelifa, R. Marouf, J. Schott, and A. Khelifa, "Effect of the binary and ternary exchanges on crystallinity and textural properties of X zeolites," Microporous Mesoporous Mater., vol. 113, no. 1–3, pp. 343–351, Aug. 2008, doi: 10.1016/j.micromeso.2007.11.032.

I. Langmuir, "The constitution and fundamental properties of solids and liquids. Part II.-Liquids," J. Franklin Inst., vol. 184, no. 5, p. 721, 1917, doi: 10.1016/s0016-0032(17)90088-2.

J. H. De Boer, "Adsorption Phenomena," in Physical Chemistry of Solid-Gas Interfaces, London, UK: ISTE, 1956, pp. 1–27.

H. Zhang, A. Goeppert, S. Kar, and G. K. S. Prakash, "Structural parameters to consider in selecting silica supports for polyethylenimine based CO2 solid adsorbents. Importance of pore size," J. CO2 Util., vol. 26, pp. 246–253, Jul. 2018, doi: 10.1016/j.jcou.2018.05.004.

B. H. Hameed, D. K. Mahmoud, and A. L. Ahmad, "Equilibrium modeling and kinetic studies on the adsorption of basic dye by a low-cost adsorbent: Coconut (Cocos nucifera) bunch waste," J. Hazard. Mater., vol. 158, no. 1, pp. 65–72, Oct. 2008, doi: 10.1016/j.jhazmat.2008.01.034.

K. Y. Foo and B. H. Hameed, "Insights into the modeling of adsorption isotherm systems," Chem. Eng. J., vol. 156, no. 1, pp. 2–10, Jan. 2010.

P. M. V. Raja and A. R. Barron, "BET surface area analysis of nanoparticles," Phys. Methods Chem. Nano Sci., vol. i, pp. 1–7, 2019.

E. Sugawara and H. Nikaido, "Properties of AdeABC and AdeIJK efflux systems of Acinetobacter baumannii compared with those of the AcrAB-TolC system of Escherichia coli.," Antimicrob. Agents Chemother., vol. 58, no. 12, pp. 7250–7, Dec. 2014, doi: 10.1128/AAC.03728-14.

M. Thommes, "Physical adsorption characterization of nanoporous materials," Chemie-Ingenieur-Technik, vol. 82, no. 7, pp. 1059–1073, 2010, doi: 10.1002/cite.201000064.

A. Marcilla, A. Gomez-Siurana, M. M. José, and F. J. Valdés, "Comments on the Methods of Characterization of Textural Properties of Solids from Gas Adsorption Data," Adsorpt. Sci. Technol., vol. 27, no. 1, pp. 69–84, Feb. 2009, doi: 10.1260/026361709788921579.

B. X. Medina-Rodriguez and V. Alvarado, "Use of Gas Adsorption and Inversion Methods for Shale Pore Structure Characterization," Energies, vol. 14, no. 10, p. 2880, May 2021, doi: 10.3390/en14102880.

E. P. Barrett, L. G. Joyner, and P. P. Halenda, "The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms," J. Am. Chem. Soc., vol. 73, no. 1, pp. 373–380, 1951, doi: 10.1021/ja01145a126.

D. Dollimore and G. R. Heal, "Pore-size distribution in typical adsorbent systems," J. Colloid Interface Sci., vol. 33, no. 4, pp. 508–519, 1970, doi: 10.1016/0021-9797(70)90002-0.

S. Geraedts, "Pore size distribution and surface group analysis a study of two electrical grade carbon blacks," Eindhoven Univ. Technol., 2002.

M. L. Rache, A. R. García, H. R. Zea, A. M. T. Silva, L. M. Madeira, and J. H. Ramírez, "Azo-dye orange II degradation by the heterogeneous Fenton-like process using a zeolite Y-Fe catalyst—Kinetics with a model based on the Fermi's equation," Appl. Catal. B Environ., vol. 146, pp. 192–200, Mar. 2014, doi: 10.1016/j.apcatb.2013.04.028.

S. K. Kamal, A. S. Abbas “Langmuir-Hinshelwood-Hougen-Watson Heterogeneous Kinetics Model for the Description of Fe ( II ) Ion Exchange on Na-X Zeolite,” Eng. Technol. Appl. Sci. Res., vol. 12, no. 5, pp. 9265–9269, 2022.

A. A. AbdulRazak and S. Rohani, "Sodium Dodecyl Sulfate-Modified Fe 2 O 3 /Molecular Sieves for Removal of Rhodamine B Dyes," Adv. Mater. Sci. Eng., vol. 2018, pp. 1–10, 2018, doi: 10.1155/2018/3849867.

Downloads

Published

2022-12-30

How to Cite

Kamal, S. K., & Abbas, A. S. (2022). Textural Properties Characterization for NaX and FeX Zeolites by Nitrogen Adsorption-desorption Technique. Iraqi Journal of Chemical and Petroleum Engineering, 23(4), 33-41. https://doi.org/10.31699/IJCPE.2022.4.5

Publication Dates

Most read articles by the same author(s)

<< < 1 2