A Comprehensive Geomechanical Study to Understand Drilling Challenges in the Eridu Oil Field, Southern of Iraq
DOI:
https://doi.org/10.31699/IJCPE.2024.2.7Keywords:
Geomechanical Study; Drilling Challenges; 1-D Geomechanical Model; Wellbore Instability Eridu oil fieldAbstract
In recent years, the Eridu oil field has emerged as a key player in the petroleum industry in southern Iraq as it is the biggest Iraqi oil discovery in 20 years. Extending along a vast area of 5806 km2, the field has commercial oil reserves in formations such as Mishrif, Nahr Umr, Zubair, and Yamama. However, drilling operations in this field have faced significant challenges, including delays and suspensions caused by wellbore instability. One of the main obstacles encountered during drilling operations in the Eridu oil field is the occurrence of partial losses in weak vugs dolomite formations, as well as issues related to sever borehole instabilities such as drilling in tight holes, caving, and breakout due to shear failure in the borehole wall. To address these challenges, a 1 D Geomechanical model (1-D MEM) was constructed using data from vertical wells to better understand the underlying causes of drilling problems. The findings of the 1-D MEM, particularly in relation to mechanical rock properties, rock Elasticity factors, pore pressure, and fracture gradient complex formations like Tanuma and Mishrif, were instrumented in planning drilling operations for inclined and highly deviated wells. By utilizing open hole well logging data and calibrating the model with various resources of data including drilling observations, core mechanical analyses, and pore pressure measurements, a more accurate assessment of wellbore instabilities was achieved. The analysis revealed that many of the wellbore instabilities, such as pack-off, breakout, and stuck pipe, were attributed to the insufficient mud weight that failed to support the rock in the borehole wall. To avoid these issues, it was determined that a safe mud weight range of 11-12.5 ppg is necessary to prevent wellbore instability in shale formations. The study also highlighted the importance of using proper mud weight to prevent shear failure and other drilling complications. The findings of this study provide insights that can be utilized as a cost-effective tool for planning directional and horizontal drilling operations in the Eridu oil field. The accuracy of the failure criteria and geomechanical model is significantly superior and aligns with the analysis of breakouts observed in the caliper and image logs.
References
A. K. Abbas, Y.M. Al-Asadi, M. Alsaba, R.E. Flori, and S. Alhussainy. ‘’Development of a geomechanical model for drilling deviated wells through the Zubair Formation in Southern Iraq. In Proceedings of the SPE/IADC Middle East Drilling Technology Conference and Exhibition, Abu Dhabi, UAE’’, 29–31 January, 2018. https://doi.org/10.2118/189306-ms
M. Mansourizadeh, M. Jamshidian, P. Bazargan, and O. Mohammadzadeh., ‘’Wellbore stability analysis and breakout pressure prediction in vertical and deviated boreholes using failure criteria – A case study’’. Journal of Petroleum Science and Engineering 145, 482–492., 2016. https://doi.org/10.1016/j.petrol.2016.06.024
F. H. AlShibli and A. Alrazzaq, “Laboratory Testing and Evaluating of Shale Interaction with Mud for Tanuma Shale formation in Southern Iraq”. Iraqi Journal of Chemical and Petroleum Engineering, vol.23No.3 (35–41), 2022 , https://doi.org/10.31699/IJCPE.2022.3.5
U. A Tare, and F.Mody. “Managing borehole stability problems: on the learning, unlearning and relearning curve”. In: Proceedings of the AADE 2002 technical conference on ‘‘Drilling and Completion Fluids and Waste Management’’, Texas, 2–3 April 2002, paper AADE-02-DFWM-HO-31.
Akong Bassey, et al. ‘’Borehole Stability Management Using the New Mudweight Window Concept; A Case Study of Well KTY 02, KTY 03 and KTY 04’’, 2016. SPE-184279-MS. https://doi.org/10.2118/184279-MS
Lukoil Company. ‘’Outline Development Proposal of Eridu oil field’’, 2020 (unpublished report).
A. K Faraj .and H. A Abdul Hussein., “Application of Finite Element Technique: A Review Study”. Iraqi Journal of Chemical and Petroleum Engineering, 2016, vol. 24, no.1, pp.113 – 124, Mar 2023. https://doi.org/10.31699/IJCPE.2023.1.13
A. K. Abbas, M. Alsaba, and U. Alameedy, ‘’Wellbore Trajectory Optimization Using Rate of Penetration and Wellbore Stability Analysis’’, SPE -193755-MS. 2018. https://doi.org/10.2118/193755-MS
V. Rasouli, Z. J. Pallikathekathil, and E. Mawuli, “The influence of perturbed stresses near faults on drilling strategy: a case study in Blacktip field, North Australia”, Journal of Petroleum Science and Engineering, 2011, 76(1-2), 37-50. https://doi.org/10.1016/j.petrol.2010.12.003
J. S. Bell, “Practical methods for estimating in situ stresses for borehole stability applications in sedimentary basins”. Journal of Petroleum Science and Engineering, 2003, vol. 38 (3–4). https://doi.org/10.1016/S0920-4105(03)00025-1
Schlumberger, “Techlog software, Pore Pressure Prediction and Wellbore Stability Analysis Workflow/ Solutions Training”, 2021.
A. H. Dakhiel and H. A. Abdul Hussein, “Integrated 3D Mechanical Earth Modelling to Intensively Investigate the Wellbore Instability of Zubair Oil Field, Southern Iraq”. Iraqi Geological journal, 54 (2E), 38-58. 2021. https://doi.org/10.46717/igj.54.2E.4Ms-2021-11-20
A. K. AlHusseini and S. M. Hamed-Allah, “Estimation Pore and Fracture Pressure Based on Log Data; Case Study: Mishrif Formation/Buzurgan Oilfield at Iraq”. Iraqi Journal of Chemical and Petroleum Engineering, Vol. 24, (65 – 78), 2023. https://doi.org/10.31699/IJCPE.2023.1.8
R. A. Plumb, “Influence of composition and texture on the failure properties of clastic rocks”. Eurock 94, Rock Mechanics in Petroleum Engineering Conference, Delft, Netherlands. 1994. https://doi.org/10.2118/28022-MS
H. Osama, A. Al-Qahtani and S. Alamer ‘’Mitigating Well Stability Risk through Geomechanical Solutions’’, 2018. SPE-192872 MS. https://doi.org/10.2118/192872-MS
M. Lal, “Shale stability: drilling fluid interaction and shale strength”. SPE Latin American and Caribbean Petroleum Engineering Conference held in Caracas, Venezuela. 1999. https://doi.org/10.2118/54356-MS
T. Al-Bazali, Zhang. J, M.E. Chenevert,and M.M. Sharma, “Experimental and numerical study on the impact of strain rate on failure characteristics of shales”. Journal of Petroleum Science and Engineering. 2008. 60, 194–204. https://doi.org/10.1016/j.petrol.2007.09.001
R. K. Abdulmajeed, and S. M Awadh., ‘’A Predictive Model for Estimating Unconfined Compressive Strength from Petrophysical Properties in the Buzurgan Oilfield, Khasib Formation, Using Log Data’’. Iraqi Geological journal, 55 (2E),140-151. 2022, https://doi.org/10.46717/igj.55.2E.9ms-2022-11-23
S. Maleki, R. Gholami, V. Rasouli, and A. Mortadhzadeh, ‘’Comparison of different failure criteria in prediction of safe mud window in drilling practice’’, Earth science review, Vol. 136, pp 36-58. 2014. https://doi.org/10.1016/j.earscirev.2014.05.010
A. M. Al-Ajmi, and R. Zimmerman, ‘’Stablity Anaylsis of Vertical Borehole Using Mogi-Coloumb Failure Criterion’’, International Journal of Rock Mechanics and Mining Sciences 43 (8):1200-1211. 2006. https://doi.org/10.1016/j.ijrmms.2006.04.001
H. Q. Mohammed, A. K. Abbas, and H. H. Dahm, ‘’Wellbore Instability Analysis for Nahr Umr Formation in Southern Iraq’’. Presented at the 52nd US Rock Mechanics/ Geomechanics Symposium Seattle, (ARMA), Washington, June 17-20, Paper No. ARMA 18–916, 2018.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 The Author(s). Published by College of Engineering, University of Baghdad.
This work is licensed under a Creative Commons Attribution 4.0 International License.
