Ciprofloxacin adsorption via compressed wood activated carbon with ZnCl2 activating agent from simulated wastewater: Mechanism studying

Authors

  • Dhuha Hameed Hamad Department of Chemical Engineering, College of Engineering, University of Baghdad, Aljadria, Baghdad, 10071, Iraq
  • Haider A. Al-Jendeel Department of Chemical Engineering, College of Engineering, University of Baghdad, Aljadria, Baghdad, 10071, Iraq https://orcid.org/0000-0001-8548-9586
  • Mustafa Hathal Sustainable Solution Research Lab., University of Pannonia, Veszprem, Hungary

DOI:

https://doi.org/10.31699/IJCPE.2026.1.8

Keywords:

Compressed wood; activated carbon; ZnCl2 activating agent; intraparticle diffusion; Temkin model; ciprofloxacin; adsorption mechanism; exothermic adsorption

Abstract

      The current study objective is to synthesize activated carbon (AC) from compressed wood using the ZnCl2 activating agent and to assess the ciprofloxacin (CIP) elimination efficiency in simulated wastewater. The produced AC was characterized using multiple techniques, including SEM, BET, FTIR, AFM, and XRD. The adsorbent demonstrates high adsorption performance, achieving 91% removal of CIP within 5 hours at an initial pollutant concentration of 100 mg/L with an AC dose of 2 g/L. Experimental data correspond to the Freundlich isotherm model (R² = 0.995) as well as the Langmuir competitive fitting (R² = 0.99), while the root mean square error (RMSE) equation best fits the Langmuir model. Moreover, the pseudo-second-order model (R² = 0.999) was used to describe the kinetic data. The adsorption thermodynamics indicate spontaneous adsorption with exothermic behavior (ΔG<0, ΔH◦<0, ΔS◦<0). A combination of mechanisms contributed to the CIP adsorption process (π-π interaction, hydrophobic interaction, bulk diffusion, hydrogen bonds, in addition to physical and chemical adsorption mechanisms). Pyrolysis recoverability shows a good result after three cycles (qe = 101.08 mg/g, compared to 170.13 mg/g in the first cycle). In conclusion, compressed wood AC offers a sustainable, low-cost adsorbent for treating wastewater and presents a prospect for addressing ecosystem contamination challenges.

References

[1] V. Rizzi et al., “Commercial bentonite clay as low-cost and recyclable ‘natural’ adsorbent for the Carbendazim removal/recover from water: Overview on the adsorption process and preliminary photodegradation considerations,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 602, p. 125060, Oct. 2020, https://doi.org/10.1016/j.colsurfa.2020.125060

[2] G. Enaime, A. Baçaoui, A. Yaacoubi, and M. Lübken, “Biochar for wastewater treatment-conversion technologies and applications,” In Applied Sciences (Switzerland), May 01, 2020, MDPI AG. https://doi.org/10.3390/app10103492

[3] Z. Chen et al., “Photocatalytic antifouling properties of novel PVDF membranes improved by incorporation of SnO2-GO nanocomposite for water treatment,” Separation and Purification Technology, vol. 259, p. 118184, Mar. 2021, https://doi.org/10.1016/j.seppur.2020.118184

[4] A. E. Abdelhamid, A. E. Elsayed, M. Naguib, and E. A. Ali, “Effective Dye Removal by Acrylic-Based Membrane Constructed from Textile Fibers Waste,” Fibers and Polymers, vol. 24, no. 7, pp. 2391–2399, Jul. 2023, https://doi.org/10.1007/s12221-023-00247-z

[5] T. Thiebault, “Sulfamethoxazole/Trimethoprim ratio as a new marker in raw wastewaters: A critical review,” Science of The Total Environment, vol. 715, p. 136916, May 2020, https://doi.org/10.1016/j.scitotenv.2020.136916

[6] S. D. Martinho, V. C. Fernandes, S. A. Figueiredo, and C. Delerue-Matos, “Microplastic Pollution Focused on Sources, Distribution, Contaminant Interactions, Analytical Methods, and Wastewater Removal Strategies: A Review,” International Journal of Environmental Research and Public Health, vol. 19, no. 9, p. 5610, May 2022, https://doi.org/10.3390/ijerph19095610

[7] E. Brillas, “Progress of homogeneous and heterogeneous electro-Fenton treatments of antibiotics in synthetic and real wastewaters. A critical review on the period 2017–2021,” Science of The Total Environment, vol. 819, p. 153102, May 2022, https://doi.org/10.1016/j.scitotenv.2022.153102

[8] O. Falyouna, M. Faizul Idham, I. Maamoun, K. Bensaida, Y. Sugihara, and O. Eljamal, “Promotion of ciprofloxacin adsorption from contaminated solutions by oxalate modified nanoscale zerovalent iron particles 2,” Journal of Molecular Liquids, Vol. 359, p. 1193231 August 2022, https://doi.org/10.1016/j.molliq.2022.119323

[9] E. Brillas and J. M. Peralta-Hernández, “Antibiotic removal from synthetic and real aqueous matrices by peroxymonosulfate-based advanced oxidation processes. A review of recent development,” Chemosphere, Mar. 01, 2024, Elsevier Ltd. https://doi.org/10.1016/j.chemosphere.2024.141153

[10] H. Fan, Y. Ma, J. Wan, Y. Wang, Z. Li, and Y. Chen, “Adsorption properties and mechanisms of novel biomaterials from banyan aerial roots via simple modification for ciprofloxacin removal,” Science of The Total Environment, vol. 708, p. 134630, Mar. 2020, https://doi.org/10.1016/j.scitotenv.2019.134630

[11] O. Falyouna, I. Maamoun, K. Bensaida, A. Tahara, Y. Sugihara, O. Eljamal, “Encapsulation of iron nanoparticles with magnesium hydroxide shell for remarkable removal of ciprofloxacin from contaminated water,” Journal of colloid and Interface science, vol. 605, pp. 813–827, Jan. 2022, https://doi.org/10.1016/j.jcis.2021.07.154

[12] N. Sharifpour, F. M. Moghaddam, G. Mardani, and M. Malakootian, “Evaluation of the activated carbon coated with multiwalled carbon nanotubes in removal of ciprofloxacin from aqueous solutions,” Applied Water Science, vol. 10, no. 6, Jun. 2020, https://doi.org/10.1007/s13201-020-01229-9

[13] D. Yang et al., “Biochar-supported nanoscale zero-valent iron can simultaneously decrease cadmium and arsenic uptake by rice grains in co-contaminated soil,” Science of The Total Environment, vol. 814, p. 152798, Mar. 2022, https://doi.org/10.1016/j.scitotenv.2021.152798

[14] N. T. Nguyen, T. H. Dao, T. T. Truong, T. M. T. Nguyen, and T. D. Pham, “Adsorption characteristic of ciprofloxacin antibiotic onto synthesized alpha alumina nanoparticles with surface modification by polyanion,” Journal of Molecular Liquids, vol. 309, p. 113150, Jul. 2020, https://doi.org/10.1016/j.molliq.2020.113150

[15] O. S. Agboola and O. S. Bello, “Enhanced adsorption of ciprofloxacin from aqueous solutions using functionalized banana stalk,” Biomass Conversion and Biorefinery, vol. 12, no. 12, pp. 5463–5478, Dec. 2022, https://doi.org/10.1007/s13399-020-01038-9

[16] V. J. Landin-Sandoval, D. I. Mendoza-Castillo, A. Bonilla-Petriciolet, I. A. Aguayo-Villarreal, H. E. Reynel-Avila, and H. A. Gonzalez-Ponce, “Valorization of agri-food industry wastes to prepare adsorbents for heavy metal removal from water,” Journal of Environmental Chemical Engineering, vol. 8, no. 5, p. 104067, Oct. 2020, https://doi.org/10.1016/j.jece.2020.104067

[17] W. Widiyastuti, M. Fahrudin Rois, N. M. I. P. Suari, and H. Setyawan, “Activated carbon nanofibers derived from coconut shell charcoal for dye removal application,” Advanced Powder Technology, vol. 31, no. 8, pp. 3267–3273, Aug. 2020, https://doi.org/10.1016/j.apt.2020.06.012

[18] R. R. Karri, J. N. Sahu, and B. C. Meikap, “Improving efficacy of Cr (VI) adsorption process on sustainable adsorbent derived from waste biomass (sugarcane bagasse) with help of ant colony optimization,” Industrial Crops and Products, vol. 143, p. 111927, Jan. 2020, https://doi.org/10.1016/j.indcrop.2019.111927

[19] S. M. Kharrazi, N. Mirghaffari, M. M. Dastgerdi, and M. Soleimani, “A novel post-modification of powdered activated carbon prepared from lignocellulosic waste through thermal tension treatment to enhance the porosity and heavy metals adsorption,” Powder Technology, vol. 366, pp. 358–368, Apr. 2020, https://doi.org/10.1016/j.powtec.2020.01.065

[20] Y. Oday and H. A. Al-Jendeel, “Synthesis and Characterization of Acidic Activated Carbon from Corncobs for Adsorption Desulfurization of Simulated Crude Oil,” Journal of Ecological Engineering, vol. 25, no. 8, pp. 141–150, Aug. 2024, https://doi.org/10.12911/22998993/189895

[21] H. Abbas and A. S. Abbas, “Adsorption of Flagyl on Prepared Ash from Rice Husk,” Iraqi Journal of Chemical and Petroleum Engineering, vol. 22, no. 4, pp. 11–17, Dec. 2021, https://doi.org/10.31699/ijcpe.2021.4.2

[22] M. Aravind and M. Amalanathan, “Structural, morphological, and optical properties of country egg shell derived activated carbon for dye removal,” Materials Today: Proceedings, vol. 43, pp. 1491–1495, 2021, https://doi.org/10.1016/j.matpr.2020.09.311

[23] M. J. Ahmed, B. H. Hameed, and M. A. Khan, “Recent progress on carbonaceous materials-based adsorbents derived from cigarette wastes for sustainable remediation of aquatic pollutants: A review,” Journal of Analytical and Applied Pyrolysis, vol. 183, p. 106779, Oct. 2024, https://doi.org/10.1016/j.jaap.2024.106779

[24] N. A. Raheem, N. S. Majeed, and Z. Al Timimi, “Phenol Adsorption from Simulated Wastewater Using Activated Spent Tea Leaves,” Iraqi Journal of Chemical and Petroleum Engineering, vol. 25, no. 1, pp. 95–102, Mar. 2024, https://doi.org/10.31699/ijcpe.2024.1.9

[25] N. S. Razali et al., “High-Surface-Area-Activated Carbon Derived from Mango Peels and Seeds Wastes via Microwave-Induced ZnCl2 Activation for Adsorption of Methylene Blue Dye Molecules: Statistical Optimization and Mechanism,” Molecules, vol. 27, no. 20, p. 6947, Oct. 2022, https://doi.org/10.3390/molecules27206947

[26] S. M. Al-Jubouri, H. A. Al-Jendeel, S. A. Rashid, and S. Al-Batty, “Antibiotics adsorption from contaminated water by composites of ZSM-5 zeolite nanocrystals coated carbon,” Journal of Water Process Engineering, vol. 47, p. 102745, Jun. 2022, https://doi.org/10.1016/j.jwpe.2022.102745

[27] H. Aljendeel, H. Rasheed, N. Ahmedzeki, and M. Alhassani, “Dual Application of Al-Kheriat of Removal of Arsenic from Aqueous Solution and Acting as Rodenticide,” Journal of Ecological Engineering, vol. 24, no. 4, pp. 16–26, Apr. 2023, https://doi.org/10.12911/22998993/159335

[28] K. K. Hummadi, “Optimal Operating Conditions for Adsorption of Heavy Metals from an Aqueous Solution by an Agriculture Waste,” Iraqi Journal of Chemical and Petroleum Engineering, vol. 22, no. 2, pp. 27–35, Jun. 2021, https://doi.org/10.31699/ijcpe.2021.2.4

[29] S. B. Daffalla, H. Mukhtar, and M. S. Shaharun, “Preparation and characterization of rice husk adsorbents for phenol removal from aqueous systems,” PLoS One, vol. 15, no. 12, p. e0243540, Dec. 2020, https://doi.org/10.1371/journal.pone.0243540

[30] G. Dragan, V. Kutarov, E. Schieferstein, and A. Iorgov, “Adsorption hysteresis in open slit-like micropores,” Molecules, vol. 26, no. 16, Aug. 2021, https://doi.org/10.3390/molecules26165074

[31] K. Kiełbasa et al., “Carbon Dioxide Adsorption over Activated Carbons Produced from Molasses Using H2SO4, H3PO4, HCl, NaOH, and KOH as Activating Agents,” Molecules, vol. 27, no. 21, Nov. 2022, https://doi.org/10.3390/molecules27217467

[32] Z. Sun et al., “Corncob-derived Activated Carbon for Efficient Adsorption Dye in Sewage,” ES Food and Agroforestry, vol. 4, pp. 61–74, Jun. 2021, https://doi.org/10.30919/esfaf473

[33] S. Foorginezhad, M. M. Zerafat, M. Asadnia, and G. Rezvannasab, ‘Activated porous carbon derived from sawdust for CO2 capture’, Materials Chemistry and Physics, vol. 317, Apr. 2024, https://doi.org/10.1016/j.matchemphys.2024.129177

[34] P. Liu, T. Song, R. Deng, X. Hou, and J. Yi, “The efficient removal of congo red and ciprofloxacin by peony seeds shell activated carbon with ultra-high specific surface area,” Environmental Science and Pollution Research, vol. 30, no. 18, pp. 53177–53190, Apr. 2023, https://doi.org/10.1007/s11356-023-26146-7

[35] Y. Gao, Q. Yue, B. Gao, and A. Li, “Insight into activated carbon from different kinds of chemical activating agents: A review,” Science of The Total Environment, vol. 746, p. 141094, Dec. 2020, https://doi.org/10.1016/j.scitotenv.2020.141094

[36] D. H. Hamad and H. A. Al-Jendeel, “Study of ciprofloxacin adsorption using activated carbon from compressed wood: Evaluation of performance and efficiency in pollutant removal,” Journal of Ecological Engineering, vol. 26, no. 9, pp. 440–448, Sep. 2025, https://doi.org/10.12911/22998993/205476

[37] S. Hadi, E. Taheri, M. M. Amin, A. Fatehizadeh, and E. C. Lima, “Fabrication of activated carbon from pomegranate husk by dual consecutive chemical activation for 4-chlorophenol adsorption,” Environmental Science and Pollution Research, vol. 28, no. 11, pp. 13919–13930, Mar. 2021, https://doi.org/10.1007/s11356-020-11624-z

[38] J. Serafin, K. Kiełbasa, and B. Michalkiewicz, “The new tailored nanoporous carbons from the common polypody (Polypodium vulgare): The role of textural properties for enhanced CO2 adsorption,” Chemical Engineering Journal, vol. 429, p. 131751, Feb. 2022, https://doi.org/10.1016/j.cej.2021.131751

[39] H. Ji, T. Wang, T. Huang, B. Lai, and W. Liu, “Adsorptive removal of ciprofloxacin with different dissociated species onto titanate nanotubes,” Journal of Cleaner Production, vol. 278, p. 123924, Jan. 2021, https://doi.org/10.1016/j.jclepro.2020.123924

[40] M. Gayathiri, T. Pulingam, K. T. Lee, and K. Sudesh, “Activated carbon from biomass waste precursors: Factors affecting 1 production and adsorption mechanism,” Chemosphere, Vol. 294, p. 133764, May 2022, https://doi.org/10.1016/j.chemosphere.2022.133764

[41] E. S. M. Al-Mashhadani, M. K. H. Al-Mashhadani, and M. A. Al-Maari, “Biosorption of Ciprofloxacin (CIP) using the Waste of Extraction Process of Microalgae: The Equilibrium Isotherm and Kinetic Study,” Iraqi Journal of Chemical and Petroleum Engineering, vol. 24, no. 4, pp. 1–15, Dec. 2023, https://doi.org/10.31699/ijcpe.2023.4.1

[42] B. Tanhaei, A. Ayati, E. Iakovleva, and M. Sillanpää, “Efficient carbon interlayed magnetic chitosan adsorbent for anionic dye removal: Synthesis, characterization and adsorption study,” International Journal of Biological Macromolecules, vol. 164, pp. 3621–3631, Dec. 2020, https://doi.org/10.1016/j.ijbiomac.2020.08.207

[43] J. O. Ighalo et al., “Mitigation of clofibric acid pollution by adsorption: A review of recent developments,” Journal of Environmental Chemical Engineering, vol. 8, no. 5, Oct. 2020, https://doi.org/10.1016/j.jece.2020.104264

[44] T. O. Hodson, ‘Root-mean-square error (RMSE) or mean absolute error (MAE): when to use them or not’, Geoscintific Model Development, vol. 15, no. 14, pp. 5481–5487, Jul. 2022, https://doi.org/10.5194/gmd-15-5481-2022

[45] O. A. A. Eletta, I. O. Tijani, and J. O. Ighalo, “Adsorption of Pb(II) and Phenol from Wastewater Using Silver Nitrate Modified Activated Carbon from Groundnut (Arachis hypogaea L.) Shells.” The West Indian Journal of Engineering, Vol.43, no.1, pp.26-35, July 2020.

[46] A. Chandrasekaran, C. Patra, S. Narayanasamy, and S. Subbiah, “Adsorptive removal of Ciprofloxacin and Amoxicillin from single and binary aqueous systems using acid-activated carbon from Prosopis juliflora,” Environmental Research, vol. 188, Sep. 2020, https://doi.org/10.1016/j.envres.2020.109825

[47] D. Balarak and G. McKay, “Utilization of MWCNTs/Al 2 O 3 as adsorbent for ciprofloxacin removal: equilibrium, kinetics and thermodynamic studies,” Journal of Environmental Science and Health, Part A, vol. 56, no. 3, pp. 324–333, Feb. 2021, https://doi.org/10.1080/10934529.2021.1873674

[48] M. Malakootian, M. Faraji, M. Malakootian, and M. Nozari, “Ciprofloxacin removal from aqueous media by adsorption process: A systematic review and meta-analysis,” Desalination and Water Treatment, vol. 229, pp. 252–282, Jul. 2021, https://doi.org/10.5004/dwt.2021.27334

[49] C. A. Igwegbe, S. N. Oba, C. O. Aniagor, A. G. Adeniyi, and J. O. Ighalo, “Adsorption of ciprofloxacin from water: A comprehensive review,” Korean Society of Industrial Engineering Chemistry, Jan. 25, 2021, https://doi.org/10.1016/j.jiec.2020.09.023

[50] J. Gubitosa, V. Rizzi, D. Cignolo, P. Fini, F. Fanelli, and P. Cosma, “From agricultural wastes to a resource: Kiwi Peels, as long-lasting, recyclable adsorbent, to remove emerging pollutants from water. The case of Ciprofloxacin removal,” Sustainable Chemistry and Pharmacy, vol. 29, Oct. 2022, https://doi.org/10.1016/j.scp.2022.100749

[51] A. Kumar, C. Patra, S. Kumar, and S. Narayanasamy, “Effect of magnetization on the adsorptive removal of an emerging contaminant ciprofloxacin by magnetic acid activated carbon,” Environmental Research, vol. 206, p. 112604, Apr. 2022, https://doi.org/10.1016/j.envres.2021.112604

[52] N. Theamwong et al., “Activated carbons from waste Cassia bakeriana seed pods as high-performance adsorbents for toxic anionic dye and ciprofloxacin antibiotic remediation,” Bioresource Technology, vol. 341, p. 125832, Dec. 2021, https://doi.org/10.1016/j.biortech.2021.125832

[53] S. Dou, X.-X. Ke, Z.-D. Shao, L.-B. Zhong, Q.-B. Zhao, and Y.-M. Zheng, “Fish scale-based biochar with defined pore size and ultrahigh specific surface area for highly efficient adsorption of ciprofloxacin,” Chemosphere, vol. 287, p. 131962, Jan. 2022, https://doi.org/10.1016/j.chemosphere.2021.131962

[54] J. K. Bediako et al., “Evaluation of orange peel-derived activated carbons for treatment of dye-contaminated wastewater tailings,” Environmental Science and Pollution Research, vol. 27, no. 1, pp. 1053–1068, Jan. 2020, https://doi.org/10.1007/s11356-019-07031-8

Downloads

Published

2026-03-30

How to Cite

Hamad, D. H., Al-Jendeel, H. A., & Hathal, M. (2026). Ciprofloxacin adsorption via compressed wood activated carbon with ZnCl2 activating agent from simulated wastewater: Mechanism studying. Iraqi Journal of Chemical and Petroleum Engineering, 27(1), 93-104. https://doi.org/10.31699/IJCPE.2026.1.8