Experimental study of gas-brine capillarity measurement at high temperature and pressure

Authors

  • Hiwa Sidiq Komar University of Science and Technology, Sulaimani, Kurdistan Region, Iraq

DOI:

https://doi.org/10.31699/IJCPE.2025.4.8

Keywords:

Capillary Pressure; Coreflooding; HPHT; Gas Reservoir

Abstract

   Understanding capillary pressure profiles during gas-brine coreflooding is essential for analyzing fluid behavior in porous media, particularly in gas reservoirs. Direct measurement of capillary pressure in dynamic displacement experiments relies on evaluating the balance between capillary forces and pressure gradients within the porous structure. In this experimental study three rock samples were taken from a natural gas reservoir located on Australia's Northwest Shelf. Experiments were conducted under simulated reservoir conditions (~ 41.37 MPa and 368.15 K) to investigate the effects of pore size, porosity, and water saturation on the capillary pressure profile. The capillary pressure curves (Samples C1–C3) reveal distinct dynamic behaviors. Samples C1 and C2, which have higher permeability and porosity, exhibit an initial decrease followed by a monotonic rise in capillary pressure until breakthrough. In contrast, Sample C3, characterized by lower permeability and porosity, shows lower brine saturation. However, higher brine saturation would typically be expected in low-porosity samples due to increased grain surface area and smaller pore throats that trap the wetting phase. This unexpected result is attributed to the experiments being conducted under high-pressure and high-temperature conditions. These findings underscore the critical role of pore geometry in governing displacement efficiency and capillary trapping. They also provide valuable quantitative insights for reservoir modeling, particularly in predicting gas recovery under HPHT conditions where capillary forces are significant.

References

[1] R. T. Armstrong, M. L. Porter and D. Wildenschild, "Linking pore-scale interfacial curvature to column-scale capillary pressure," Advances in Water Resources, vol. 46, pp. 55-62, 2012, https://doi.org/10.1016/j.advwatres.2012.05.009

[2] J. S. Ward and N. R. Morrow, "Capillary Pressures and Gas Relative Permeabilities of Low-Permeability Sandstone," SPE Formation Evaluation, pp. 345-356, 1987, https://doi.org/10.2118/13882-PA

[3] W. Song, J. Yao, K. Zhang, Y. Yang and H. Sun, "Understanding gas transport mechanisms in shale gas reservoir: Pore network modelling approach," Advances in Geo-Energy Research, vol. 6, no. 4, pp. 359-360, 2022, https://doi.org/10.46690/ager.2022.04.11

[4] Y. Xiao, Y. He, J. Zheng and J. Zhao, "Modeling of two-phase flow in heterogeneous wet porous," Capillarity, vol. 5, no. 3, pp. 41-50, 2022, https://doi.org/10.46690/capi.2022.03.01

[5] S. T. Hussain, K. Regenauer-Lieb, A. Zhuravljov, F. Hussain and S. S. Rahman, "The impact of wettability and fluid saturations on multiphase representative elementary volume estimations of micro-porous media," Capillarity, vol. 9, no. 1, pp. 1-8, 2023, https://doi.org/10.46690/capi.2023.10.01

[6] Y. Li, H. Luo, H. Li, S. Chen, X. Jiang and J. Li, "Dynamic capillarity during displacement process in fractured tight reservoirs with multiple fluid viscosities," Energy Science & Engineering, vol. 8, pp. 300-311, 2019, https://doi.org/10.1002/ese3.558

[7] Y. Li, H. Li, J. Cai, Q. Ma and J. Zhang, "The dynamic effect in capillary pressure during the displacement process in ultra-low permeability sandstone reservoirs," Capillarity, vol. 1, no. 2, pp. 11-18, 2018, https://doi.org/10.26804/capi.2018.02.01

[8] D. B. Das and M. Mirzaei, "Dynamic effects in capillary pressure relationships for two-phase flow in porous media: Experiments and numerical analyses," AIChE Journal, vol. 58, no. 12, pp. 3891-3900, 2012, https://doi.org/10.1002/aic.13777

[9] Y. Li, H. Luo, H. Li, X. Liu, Y. Tan, S. Chen and J. Cai, "A brief review of dynamic capillarity effect and its characteristics in low permeability and tight reservoirs," Journal of Petroleum Science and Engineering, vol. 189, 2020, https://doi.org/10.1016/j.petrol.2020.106959

[10] Q. Lin, B. Bijeljic, H. Rieke and M. J. Blunt, "Visualization and quantification of capillary drainage in the pore space of laminated sandstone by a porous plate method using differential imaging X-ray microtomography," Water Resources Research, pp. 7457-7468, 2017, https://doi.org/10.1002/2017WR021083

[11] I. Shikhov and C. H. Arns, "Evaluation of Capillary Pressure Methods via Digital Rock Simulations," Transport in Porous Media, vol. 107, no. 2, pp. 623-640, 2015, https://doi.org/10.1007/s11242-015-0459-z

[12] J. Kamath and C. Laroche, "Laboratory-Based Evaluation of Gas Well Deliverability Loss Caused by Water Blocking," SPE, vol. 8, no. 01, pp. 71-80, 2003, https://doi.org/10.2118/83659-PA

[13] J. Mahadevan, M. M. Sharma and Y. C. Yortsos, "Evaporative Cleanup of Water Blocks in Gas Wells," SPE, 2005, https://doi.org/10.2118/94215-MS

[14] T. Rahman, M. Lebedev, A. Barifcani and S. Iglauer, "Residual trapping of supercritical CO2 in oil-wet sandstone," Journal of Colloid and Interface Science, vol. 469, pp. 63-68, 2016, https://doi.org/10.1016/j.jcis.2016.02.020

[15] X. Liu, Y. Kang, J. LiZhanjun, ChenAnzhao and J. Xu, "Percolation Characteristics and Fluid Movability Analysis in Tight Sandstone Oil Reservoirs," ACS Omega, vol. 5, no. 24, pp. 14316-14323, 2020, https://doi.org/10.1021/acsomega.0c00569

[16] R. S. Mohammad, M. Y. K. Tareen, A. Mengel, S. A. R. Shah and J. Iqbal, "Simulation study of relative permeability and the dynamic capillarity of waterflooding in tight oil reservoirs," Journal of Petroleum Exploration and Production Technology, vol. 10, pp. 1891-1896, 2020, https://doi.org/10.1007/s13202-020-00856-x

[17] H. Sidiq and R. Amin, "Impact of pore-pressure on the recovery efficiency from CO2-methane displacement experiments," IEEE Workshop on Environmental Energy and Structural Monitoring Systems, Taranto, Italy, 2010, pp. 1-8, https://doi.org/10.1109/EESMS.2010.5634175

[18] H. Sidiq, R. Amin, E. Van der Steen, T. Kennaird, "Super critical CO2–methane relative permeability investigation," Journal of Petroleum Science and Engineering, vol. 78, no. 3-4, pp. 654-663, 2011, https://doi.org/10.1016/j.petrol.2011.08.018

[19] M. N. Mahmood, V. Nguyen, B. Guo, "Challenges in mathematical modeling of dynamic mass transfer controlled by capillary and viscous forces in spontaneous fluid imbibition processes," Capillarity, vol. 11, no. 2, pp. 53-62, 2024, https://doi.org/10.46690/capi.2024.05.03

[20] M. Andrew, B. Bijeljic, M. J. Blunt, "Pore-by-pore capillary pressure measurements using X-ray microtomography at reservoir conditions: Curvature, snap-off, and remobilization of residual CO2," Water Resources Research, vol. 50, no. 11, pp. 8760-8774, 2014, https://doi.org/10.1002/2014WR015970

[21] A. L. Herring, C. Sun, R. T. Armstrong, Z. Li, J. E. McClure, M. Saadatfar, "Evolution of Bentheimer Sandstone Wettability During Cyclic scCO2-Brine Injections," Water Resources Research, vol. 57, no. 11, pp. 1-22, 2021, https://doi.org/10.1029/2021WR030891

[22] Y. Cao, M. Tang, Q. Zhang, J. Tang, S. Lu, "Dynamic capillary pressure analysis of tight sandstone based on digital rock model," Capillarity, vol. 3, no. 2, pp. 28-35, 2020, https://doi.org/10.46690/capi.2020.02.02

[23] Y. Li, C. Liu, H. Li, S. Chen, K. Lu, Q. Zhang and H. Luo, "A review on measurement of the dynamic effect in capillary pressure," Journal of Petroleum Science and Engineering, vol. 208, 2022, https://doi.org/10.1016/j.petrol.2021.109672

Downloads

Published

2025-12-30

How to Cite

Sidiq, H. (2025). Experimental study of gas-brine capillarity measurement at high temperature and pressure. Iraqi Journal of Chemical and Petroleum Engineering, 26(4), 89-95. https://doi.org/10.31699/IJCPE.2025.4.8